{"product_id":"parker-msc128hblsv-4-4-barbed-hose-fitting-1-4-in","title":"Parker MSC128HBLSV-4-4 Barbed Hose Fitting 1\/4 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER MSC128HBLSV-4-4 is a brass barbed hose fitting configured as a female connector with a hose barb on one end and a female swivel ball-end on the other. It accepts 1\/4-inch ID hose via the barbed end and connects to a 1\/4-inch NPSM threaded port on the female side. The swivel ball-end design allows the fitting to seat at an angle, reducing stress on the hose and thread assembly. Rated for service between -40 degrees F and 160 degrees F, this fitting suits low-pressure fluid and air line applications in HVAC, plumbing, and general mechanical systems. Plumbers, HVAC technicians, and pipefitters install it where a flexible hose must terminate at a fixed threaded port.\u003c\/p\u003e\n\u003cp\u003eThis fitting is used in residential and light commercial applications where 1\/4-inch ID hose connects to a female-threaded NPSM port. Typical scenarios include condensate lines, instrument air tubing, low-pressure water supply connections, and similar small-bore fluid handling assemblies. The brass construction resists corrosion in wet environments and is compatible with water, light oils, and many common refrigerants at low working pressures. The hex head measures 0.625 inches across flats for standard wrench engagement during installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHose barb x female swivel ball-end configuration allows angular positioning without loosening the thread connection\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance in wet and humid service environments\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch NPSM thread standard for compatibility with common domestic pipe fittings\u003c\/li\u003e\n  \u003cli\u003eRated from -40 degrees F to 160 degrees F for year-round indoor and mechanical room use\u003c\/li\u003e\n  \u003cli\u003e0.625-inch hex head allows standard open-end or adjustable wrench installation\u003c\/li\u003e\n  \u003cli\u003eOverall length of 1.5 inches suits tight-clearance installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 1\/4-inch ID flexible hose assemblies terminating at 1\/4-inch NPSM female-threaded ports in low-pressure fluid and air line applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified plumbers or HVAC technicians following applicable IPC and IFGC guidelines for small-bore fittings. Shut off and depressurize the system before removing or installing any fitting. Hand-tighten the swivel ball-end onto the threaded port first, then snug with a wrench on the hex flats — do not over-torque brass threads. Secure the hose over the barb fully before applying any system pressure, and inspect for leaks at startup.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Female Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPSM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Hose Barb x Female Swivel Ball-End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Outside Diameter\u003c\/strong\u003e: 0.290 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 0.290 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Head Size\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 160 degrees F (71.1 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F (-40 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MSC128HBLSV-4-4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540276412722,"sku":"MSC128HBLSV-4-4","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1752243643a2c28ca2fd9c7aafc9ae7a_2c27b5dc-31f2-4ef7-8c36-2f1e21b4f4c8.jpg?v=1785851001","url":"https:\/\/voomisupply.com\/products\/parker-msc128hblsv-4-4-barbed-hose-fitting-1-4-in","provider":"Voomi Supply","version":"1.0","type":"link"}