{"product_id":"parker-gbw-un385812030b-insulated-suction-line-lineset-30-ft","title":"Parker gbw.un385812030b Insulated Suction Line Lineset 30 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER gbw.un385812030b is a suction-line-only insulated lineset designed for unitary split-system air conditioning applications. It pairs a bare copper suction line with a pre-insulated liquid line, eliminating the need for field-applied insulation on the liquid side. The suction line tube runs from 3\/8 inches to 5\/8 inches in diameter, the liquid line measures 1\/2 inch in diameter, and the total lineset length is 30 feet. The outer jacket is a durable polyethylene cover that protects the foam insulation from tearing during pull-through and routing. Incremental foot markings on the insulation allow technicians to verify line length accurately and minimize copper waste during the initial system charge.\u003c\/p\u003e\n\u003cp\u003eThis lineset is suited for residential and light commercial unitary HVAC installations where a factory-insulated, ready-to-run lineset saves labor time. It is rated for use with high-pressure refrigerants including R-410A. The UV-resistant insulation is formulated to withstand outdoor exposure for a minimum of three years without degradation, making it appropriate for rooftop, exposed wall, or exterior-mounted system runs. The insulation surface is also paintable, allowing the installed lineset to be finished to match surrounding surfaces when aesthetics are a job requirement.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSuction line diameter range: 3\/8 inches to 5\/8 inches bare copper coil\u003c\/li\u003e\n  \u003cli\u003ePre-insulated liquid line: 1\/2 inch diameter, factory-applied insulation\u003c\/li\u003e\n  \u003cli\u003ePolyethylene outer jacket protects foam insulation from tears during installation\u003c\/li\u003e\n  \u003cli\u003eIncremental foot markings every foot for accurate charge verification and copper waste reduction\u003c\/li\u003e\n  \u003cli\u003eRated for high-pressure refrigerant applications including R-410A\u003c\/li\u003e\n  \u003cli\u003eUV-resistant insulation tested for a minimum of 3 years of outdoor exposure\u003c\/li\u003e\n  \u003cli\u003ePaintable surface accepts high-quality exterior paint for exposed installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for unitary split-system air conditioning and heat pump installations requiring a suction-line-only insulated lineset with a pre-insulated liquid line. Suitable for high-pressure refrigerant systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed HVAC technicians. De-energize and recover refrigerant from any existing system before disconnecting or modifying linesets per EPA Section 608 requirements. Completely seal the open ends of the copper pipe when connecting to the AC unit to prevent water or debris from entering the insulation. When installing in continuously exposed exterior areas, apply a high-quality exterior paint over the insulation surface and consider routing under plastic duct for added protection.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction Line Diameter\u003c\/strong\u003e: 3\/8 inches to 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLiquid Line Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 30 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material\u003c\/strong\u003e: Polyethylene\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation Type\u003c\/strong\u003e: Pre-insulated foam with polyethylene jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefrigerant Compatibility\u003c\/strong\u003e: R-410A and other high-pressure refrigerants\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV Resistance\u003c\/strong\u003e: Minimum 3 years outdoor rated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePaintable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: gbw.un385812030b\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51383271457074,"sku":"GBW.UN385812030B","price":239.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312674599.webp?v=1782591776","url":"https:\/\/voomisupply.com\/products\/parker-gbw-un385812030b-insulated-suction-line-lineset-30-ft","provider":"Voomi Supply","version":"1.0","type":"link"}