{"product_id":"parker-8-6-c5ox-s-steel-flared-tube-elbow-1-2-in-od","title":"Parker 8-6 C5OX-S Steel Flared Tube Elbow 1\/2 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 8-6 C5OX-S is a 90-degree straight thread elbow fitting designed for flared tube hydraulic and fluid power connections. It features a 37-degree flare end on one side and an SAE O-Ring Boss (ORB) straight thread on the other, providing a reliable, leak-resistant connection in high-pressure plumbing circuits. Constructed from steel, this fitting handles a maximum working pressure of 6000 psi and a maximum working temperature of 500 degrees F (260 degrees C). It is sized for 1\/2 inch tube outer diameter with a 9\/16 inch UNF straight thread. Hydraulic and fluid power technicians install this fitting when routing tubing at a 90-degree change of direction while terminating into a straight-thread port.\u003c\/p\u003e\n\u003cp\u003eThis elbow fitting is suited for industrial hydraulic systems, mobile equipment fluid circuits, and high-pressure plumbing applications where a flared tube line must connect to an SAE-ORB ported component such as a pump, valve, or manifold. The 37-degree flare geometry conforms to SAE J514 and ISO 8434-2 standards, making it a direct match for standard JIC-style flared tube assemblies used across a broad range of mobile and stationary hydraulic equipment. The straight thread ORB port end eliminates the need for thread sealant when an O-ring is properly seated.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree elbow configuration for direction changes in tight plumbing layouts\u003c\/li\u003e\n  \u003cli\u003e37-degree flare x SAE O-Ring Boss end connections per SAE J514 and ISO 8434-2\u003c\/li\u003e\n  \u003cli\u003eMaximum working pressure of 6000 psi for high-pressure hydraulic service\u003c\/li\u003e\n  \u003cli\u003eRated to 500 degrees F (260 degrees C) for elevated-temperature fluid systems\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in industrial and mobile equipment environments\u003c\/li\u003e\n  \u003cli\u003eUNF straight thread standard for precise, repeatable port engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service fitting for hydraulic and fluid power systems using 1\/2 inch OD flared tubing and SAE-ORB straight thread ports conforming to SAE J514 and ISO 8434-2.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified hydraulic or fluid power technician. Depressurize and drain the hydraulic circuit fully before removing or installing any fitting. Inspect the O-ring on the ORB end and replace it if damaged before torquing to the port. Do not use thread sealant tape on the straight thread ORB end; the O-ring provides the seal. Verify the 37-degree flare seat on the mating tube end is clean and free of nicks before assembly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 90 Degree Straight Thread Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x SAE-ORB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 9\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 6000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 500 degrees F (260 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 8434-2, SAE 070220, SAE J514\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8-6 C5OX-S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51543334584626,"sku":"8-6 C5OX-S","price":40.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4e8bda5f33bb752cdcbca466fbd81cae.jpg?v=1785916912","url":"https:\/\/voomisupply.com\/products\/parker-8-6-c5ox-s-steel-flared-tube-elbow-1-2-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}