{"product_id":"parker-701004-barbed-hose-fitting-1-2-in-brass-connector","title":"Parker 701004 Barbed Hose Fitting 1\/2 in Brass Connector","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 701004 is a brass barbed hose fitting connector designed for secure, leak-resistant hose-to-pipe connections in fluid transfer applications. It features a 1\/2 inch barbed end sized at 0.530 inches for a firm grip on 1\/2 inch ID hose and a 1\/2 inch Female NPSM threaded end for connection to pipe or equipment ports. The brass construction provides good corrosion resistance across a wide service temperature range, from -40 degrees F to 160 degrees F. This fitting is well suited for plumbing, HVAC, and light industrial fluid handling systems where a reliable barb-to-female-pipe transition is needed.\u003c\/p\u003e\n\u003cp\u003eThis connector is used in residential and light commercial applications where flexible hose meets a threaded female pipe port. Typical install scenarios include water supply lines, coolant loops, and other low-to-moderate pressure fluid circuits. The threaded Female NPSM connection mates with standard pipe fittings, and the barbed end retains hose without additional hardware, though a hose clamp is standard practice for pressurized service. Licensed plumbers and HVAC technicians are the primary installers of this fitting type.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBarb-to-Female NPSM connection style for hose-to-threaded-pipe transitions\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch barb sized at 0.530 inches for a secure grip on 1\/2 inch ID hose\u003c\/li\u003e\n  \u003cli\u003eBrass construction for corrosion resistance in water and fluid service\u003c\/li\u003e\n  \u003cli\u003eRated from -40 degrees F to 160 degrees F operating temperature range\u003c\/li\u003e\n  \u003cli\u003eOverall length of 1.52 inches with a 0.9063 inch hex head for wrench tightening\u003c\/li\u003e\n  \u003cli\u003eSold in a package quantity of 5 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for systems using 1\/2 inch ID flexible hose with a 1\/2 inch Female NPSM threaded port connection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis fitting is typically installed by licensed plumbers or HVAC technicians. Shut off fluid supply and relieve system pressure before removing or installing any hose fitting. Use a wrench on the hex head to tighten the threaded end; do not over-torque brass fittings. A hose clamp over the barbed end is strongly recommended for any pressurized application. Follow applicable IPC or local plumbing code requirements for the system being serviced.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Barb to Female Pipe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: Female NPSM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 0.530 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Head Size\u003c\/strong\u003e: 0.9063 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.52 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 160 degrees F (71.1 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F (-40 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 5 pieces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 701004\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51539253657906,"sku":"701004","price":61.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3ea11d1270fe5b7183b5017e3dce6228.jpg?v=1785837184","url":"https:\/\/voomisupply.com\/products\/parker-701004-barbed-hose-fitting-1-2-in-brass-connector","provider":"Voomi Supply","version":"1.0","type":"link"}