{"product_id":"parker-48ifhd-6-6-brass-inverted-male-flare-connector","title":"Parker 48IFHD-6-6 Brass Inverted Male Flare Connector","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 48IFHD-6-6 is a brass inverted male flare connector designed to join flared tubing to male NPTF threaded ports in hydraulic and fluid system applications. It features a 3\/8 inch tube OD flare end and a 3\/8-18 NPTF male threaded end, providing a reliable leak-resistant connection in a compact one-piece fitting. Rated to 1000 psi maximum working pressure and up to 250 degrees F, this connector handles demanding service conditions. It is installed by licensed plumbers, HVAC technicians, and fluid power mechanics working on refrigeration, hydraulic, or fuel system lines where an inverted flare-to-pipe thread transition is required.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for residential and light commercial applications involving copper or steel flared tubing connected to threaded component ports. Typical install scenarios include fuel delivery systems, hydraulic control lines, refrigeration piping, and compressed air or fluid circuits where SAE J51 inverted flare geometry is specified. The NPTF thread form provides a dry-seal mechanical connection without requiring additional sealant tape on the threads.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInverted male flare end accepts 3\/8 inch tube OD per SAE J51 geometry\u003c\/li\u003e\n  \u003cli\u003e3\/8-18 NPTF male thread delivers a dry-seal port connection\u003c\/li\u003e\n  \u003cli\u003e1000 psi maximum working pressure for demanding fluid system service\u003c\/li\u003e\n  \u003cli\u003e250 degrees F maximum working temperature rating\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in fuel, refrigerant, and hydraulic media\u003c\/li\u003e\n  \u003cli\u003eUL Listed and SAE J51 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for systems using SAE J51 inverted flare connections with 3\/8 inch tube OD and 3\/8-18 NPTF male threaded port interfaces.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified plumber, HVAC technician, or fluid power mechanic. Depressurize and isolate the system completely before removing or installing any fittings. Ensure mating tubing is properly flared to SAE J51 specifications before tightening the fitting to avoid deforming the flare seat. The NPTF dry-seal thread is designed to make a pressure-tight connection on thread engagement alone, but inspect all connections for leaks after returning the system to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Inverted Male Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.03 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 1000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J51, UL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 48IFHD-6-6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51541424439602,"sku":"48IFHD-6-6","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1b614ac6f2c20d0b5470a7973fad9bc5.jpg?v=1785875720","url":"https:\/\/voomisupply.com\/products\/parker-48ifhd-6-6-brass-inverted-male-flare-connector","provider":"Voomi Supply","version":"1.0","type":"link"}