{"product_id":"parker-46f-8-8-brass-flared-tube-connector-1-2-in-45-deg","title":"Parker 46F-8-8 Brass Flared Tube Connector 1\/2 in 45 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 46F-8-8 is a brass flared tube connector designed for use in hydraulic, pneumatic, and fluid-transfer lines where a leak-free, vibration-resistant connection is required. It features a 45-degree flare seat on the tube end and a female NPTF thread on the pipe end, creating a Flare x FNPTF configuration. The fitting accepts 1\/2 inch tube OD and a 1\/2-14 NPTF thread. Rated to 750 psi maximum working pressure and 250 degrees F, it is suited for demanding service conditions. Brass construction provides corrosion resistance across a range of compatible fluids. Licensed plumbers, HVAC technicians, and industrial pipefitters install this type of fitting.\u003c\/p\u003e\n\u003cp\u003eThis connector is used in residential and commercial applications involving refrigeration lines, fuel systems, hydraulic circuits, and compressed-air distribution where a flared tube must transition to a female pipe thread port. The 45-degree flare conforms to SAE J512 and SAE J513 standards, making it a direct fit in systems built to those specifications. The NPTF thread form creates a dry-seal mechanical connection, reducing dependence on thread sealant for pressure-tight joints. Overall length is 1.73 inches, keeping the fitting compact in tight routing situations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree flare seat conforms to SAE J512 and SAE J513 standards\u003c\/li\u003e\n  \u003cli\u003eFlare x FNPTF end configuration transitions tubing to female pipe thread ports\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch tube OD with 1\/2-14 NPTF thread\u003c\/li\u003e\n  \u003cli\u003e750 psi maximum working pressure for demanding fluid and gas service\u003c\/li\u003e\n  \u003cli\u003e250 degrees F maximum working temperature\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in compatible fluid systems\u003c\/li\u003e\n  \u003cli\u003eUL Listed; meets SAE J512 and SAE J513\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-install fitting for fluid and gas systems requiring a 45-degree flare tube connection to a 1\/2-14 NPTF female port, conforming to SAE J512 and SAE J513 standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician in accordance with applicable codes including the International Plumbing Code and relevant SAE standards. Depressurize and drain the system completely before removing or installing any fittings. Inspect the tube flare for roundness and surface defects before seating; a damaged flare face will prevent a leak-free joint. Tighten to snug plus the appropriate flats per SAE J512 guidelines — do not overtighten brass fittings, as this can crack the flare or distort the threads.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x FNPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.73 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J512, SAE J513, UL Listing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 46F-8-8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540490813746,"sku":"46F-8-8","price":21.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d32ca7add07fd3fde6392e1fe0c192ac.jpg?v=1785856375","url":"https:\/\/voomisupply.com\/products\/parker-46f-8-8-brass-flared-tube-connector-1-2-in-45-deg","provider":"Voomi Supply","version":"1.0","type":"link"}