{"product_id":"parker-43f-8-10-brass-flare-to-solder-fitting-1-2-in-od","title":"Parker 43F-8-10 Brass Flare to Solder Fitting 1\/2 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 43F-8-10 is a brass flare-to-solder tube fitting designed for use in refrigeration, HVAC, and fluid-system piping where a 45-degree SAE flare connection must transition to a soldered copper tube end. Machined from brass, it accepts a 1\/2 inch tube OD on the flare end with a 3\/4-16 UNF thread and connects to a 5\/8 inch reduced outside diameter solder cup on the opposite end. Rated to 750 psi maximum working pressure and 250 degrees F, this fitting handles the demanding conditions found in refrigerant lines, hydraulic-assist circuits, and compressed-gas distribution systems. It is installed by HVAC technicians, refrigeration mechanics, and licensed plumbers during new construction and service work.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for residential and light commercial HVAC and refrigeration applications where a flared tube line must tie into a sweated copper assembly. Typical scenarios include connecting factory-flared refrigerant line sets to soldered manifold headers, tying into copper distribution piping during system retrofits, or fabricating custom line assemblies on rooftop and split-system equipment. The 45-degree flare angle conforms to SAE J512 and SAE J513 standards, making it compatible with standard SAE flare fittings and tools common across the refrigeration and HVAC trades.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree SAE flare end conforms to SAE J512 and SAE J513 standards\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in refrigerant and fluid-system environments\u003c\/li\u003e\n  \u003cli\u003e3\/4-16 UNF thread mates with standard SAE flare nuts and fittings\u003c\/li\u003e\n  \u003cli\u003e750 psi maximum working pressure suits high-side refrigerant and compressed-gas lines\u003c\/li\u003e\n  \u003cli\u003eRated to 250 degrees F for use in elevated-temperature service conditions\u003c\/li\u003e\n  \u003cli\u003eUL Listed fitting for code-compliant installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard SAE 45-degree flare-to-solder adapter for use with 1\/2 inch OD tubing in HVAC, refrigeration, and fluid-piping systems conforming to SAE J512 and SAE J513 flare specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified HVAC technician, refrigeration mechanic, or licensed plumber. De-pressurize and recover any refrigerant or fluid from the system before beginning work. The flare end requires a properly formed 45-degree SAE flare; inspect the tube flare for cracks or deformation before tightening the flare nut. The solder cup end must be cleaned, fluxed, and sweated using accepted copper-brazing or soldering practices in accordance with applicable mechanical codes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x Solder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD (Flare End)\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced Outside Diameter (Solder End)\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.54 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J512, SAE J513, UL Listing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 43F-8-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51538392219954,"sku":"43F-8-10","price":35.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4e954e283053a5566a4fdaa6f76b7ec6.jpg?v=1785824276","url":"https:\/\/voomisupply.com\/products\/parker-43f-8-10-brass-flare-to-solder-fitting-1-2-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}