{"product_id":"parker-43f-10-10-brass-flare-to-solder-fitting-5-8-in","title":"Parker 43F-10-10 Brass Flare to Solder Fitting 5\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 43F-10-10 is a brass flare-to-solder tube fitting designed to connect a 45-degree flared tube end to a soldered copper line. It features a 5\/8 inch tube outside diameter, a 7\/8-14 UNF thread size, and a 45-degree flare angle conforming to SAE J512 and SAE J513 standards. The fitting is rated for a maximum working pressure of 650 psi and a maximum working temperature of 250 degrees F, making it well-suited for refrigeration, HVAC, and plumbing systems that use flare-to-sweat transitions. Licensed HVAC technicians and plumbers install this fitting when connecting flared copper tubing to a soldered joint in a sealed system.\u003c\/p\u003e\n\u003cp\u003eThis fitting is commonly used in residential and light commercial HVAC and refrigeration systems where a transition from a flared tube connection to a soldered copper fitting is required. It is appropriate for applications involving copper tubing in suction, liquid, and service line configurations. The compact overall length of 1.73 inches suits tight installation spaces in equipment cabinets, line sets, and service valve assemblies. It carries a UL Listing, supporting use in code-governed mechanical installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree flare angle meets SAE J512 and SAE J513 standards\u003c\/li\u003e\n  \u003cli\u003eFlare-to-solder end connection allows direct transition from flared tubing to soldered copper\u003c\/li\u003e\n  \u003cli\u003eRated to 650 psi maximum working pressure for use in pressurized refrigerant and fluid lines\u003c\/li\u003e\n  \u003cli\u003eMaximum working temperature of 250 degrees F suitable for typical HVAC and refrigeration operating ranges\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance and reliable sealing at the flare seat\u003c\/li\u003e\n  \u003cli\u003eUL Listed for use in installations subject to code compliance requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service fitting for HVAC, refrigeration, and plumbing systems using 5\/8 inch OD copper tubing with a 45-degree flare and a 7\/8-14 UNF thread connection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or plumber. Recover all refrigerant and depressurize the system before removing or installing any flare fitting. The solder end requires standard sweat-soldering technique with appropriate flux and solder per applicable mechanical codes. Do not overtighten the flare nut, as excess torque can crack the flare seat or distort the flare cone.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 7\/8-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlare Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x Solder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 650 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.73 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J512, SAE J513, UL Listing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121707\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 43F-10-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51544458559794,"sku":"43F-10-10","price":16.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/19634add5ab280a9bcd88c8881f4c02b.jpg?v=1785927081","url":"https:\/\/voomisupply.com\/products\/parker-43f-10-10-brass-flare-to-solder-fitting-5-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}