{"product_id":"parker-4-x6ef-s-steel-swivel-elbow-connector-1-4-in-od","title":"Parker 4 X6EF-S Steel Swivel Elbow Connector 1\/4 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 4 X6EF-S is a steel flared tube swivel elbow connector designed for high-pressure hydraulic and fluid system plumbing. It provides a 90-degree swivel elbow connection using a 37-degree flare seat on one end and a male NPTF threaded end on the other, allowing technicians to route tubing lines at an angle without introducing stress or misalignment into the assembly. Rated to 6000 psi maximum working pressure, this fitting is suited for demanding fluid power and instrumentation applications. The swivel design simplifies installation by allowing the flare end to rotate freely before final tightening. Hydraulic and fluid power technicians are the primary installers for this type of fitting.\u003c\/p\u003e\n\u003cp\u003eThis connector is used in hydraulic systems, instrumentation lines, refrigeration tubing circuits, and compressed air plumbing where a 1\/4 inch OD tube must transition to a 1\/8 inch NPTF male thread at a right angle. It is appropriate for both light industrial and mobile equipment applications where a secure, leak-resistant connection is required at a tube-to-port junction. The 37-degree flare standard is common in hydraulic and instrumentation fittings across a wide range of OEM and aftermarket fluid system builds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e37-degree flare seat provides a positive, leak-resistant metal-to-metal seal on 1\/4 inch OD tubing\u003c\/li\u003e\n  \u003cli\u003eSwivel flare end rotates freely during assembly to reduce tube stress and ease alignment\u003c\/li\u003e\n  \u003cli\u003eRated to 6000 psi maximum working pressure for demanding hydraulic service\u003c\/li\u003e\n  \u003cli\u003eMale NPTF thread end conforms to the NPTF thread standard for a dry-seal connection\u003c\/li\u003e\n  \u003cli\u003eSteel construction for strength and durability in high-pressure fluid power systems\u003c\/li\u003e\n  \u003cli\u003eCompact form factor suitable for tight routing situations in instrumentation and hydraulic plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 1\/4 inch OD flared tubing and 1\/8 inch NPTF male thread ports. Compatible with systems using 37-degree flare fittings per SAE standards common in hydraulic, instrumentation, and fluid power plumbing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified hydraulic or fluid systems technician. Depressurize and isolate the system fully before removing or installing any fittings. Inspect the flare seat and tube flare for damage before assembly, as defects in the seating surface can compromise the seal. Follow the applicable system design specifications and relevant fluid power standards for fitting assembly procedures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Swivel Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Working Pressure\u003c\/strong\u003e: 6000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.067 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121707\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4 X6EF-S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51542750789938,"sku":"4 X6EF-S","price":45.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cc6994aec1aa47e85e983deb2103b7e2_aed740b9-9ac8-4637-98a0-97008f16b778.jpg?v=1785906179","url":"https:\/\/voomisupply.com\/products\/parker-4-x6ef-s-steel-swivel-elbow-connector-1-4-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}