{"product_id":"parker-325hb-6-6pp-barbed-male-connector-3-8-in-npt","title":"Parker 325HB-6-6PP Barbed Male Connector 3\/8 in Npt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PARKER 325HB-6-6PP is a single-barb male tube connector designed for secure, low-pressure fluid line connections in plumbing, HVAC, and food-service equipment applications. Molded from polypropylene, this fitting accepts 3\/8-inch inside diameter tubing and terminates with a 3\/8-inch NPT male thread. It handles working pressures up to 125 psi and operating temperatures from 0 degrees F to 212 degrees F. The barbed end grips tubing without additional hardware, and the NPT thread seals into standard threaded ports with thread sealant or PTFE tape. At 1.61 inches overall length, it fits in compact manifold and equipment enclosure installations.\u003c\/p\u003e\u003cp\u003eThis connector is suited for residential and light commercial applications involving potable water, food-processing lines, or beverage-equipment plumbing where FDA Compliant and NSF\/ANSI 51 certification is required. Plumbers, HVAC technicians, and equipment service professionals install this fitting in ice machines, water treatment systems, fluid transfer assemblies, and similar tubing runs that terminate at NPT-threaded ports. The black polypropylene construction resists corrosion and is compatible with a broad range of non-aggressive fluid media.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-barb design secures 3\/8-inch ID tubing without clamps in low-pressure service\u003c\/li\u003e\n\u003cli\u003e3\/8-inch NPT male thread for direct connection to standard threaded ports\u003c\/li\u003e\n\u003cli\u003ePolypropylene construction resists corrosion and chemical degradation\u003c\/li\u003e\n\u003cli\u003eRated to 125 psi maximum working pressure\u003c\/li\u003e\n\u003cli\u003eTemperature range from 0 degrees F to 212 degrees F suits hot and cold fluid lines\u003c\/li\u003e\n\u003cli\u003eFDA Compliant and NSF\/ANSI 51 certified for potable water and food-equipment use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for tubing systems using 3\/8-inch ID tubing and 3\/8-inch NPT threaded ports in plumbing, HVAC, and food-service equipment assemblies.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed plumbers or qualified HVAC or equipment service technicians. Shut off the fluid supply and depressurize the line before disassembly or fitting installation. Apply PTFE tape or an approved thread sealant to the NPT male threads before making up the connection; hand-tighten and then snug with a wrench to avoid cracking the polypropylene body. Push tubing fully onto the barb until it seats against the fitting shoulder, and verify the joint is leak-free before returning the system to service.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Barbs\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Inside Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 0.43 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8 inches NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.61 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 125 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: 0 degrees F (-12.2 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 212 degrees F (100 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: FDA Compliant, NSF\/ANSI 51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 325HB-6-6PP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51538814402866,"sku":"325HB-6-6PP","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/507017cfe29a02e60845a4add06ee92d.jpg?v=1785827318","url":"https:\/\/voomisupply.com\/products\/parker-325hb-6-6pp-barbed-male-connector-3-8-in-npt","provider":"Voomi Supply","version":"1.0","type":"link"}