{"product_id":"parker-269hb-12-12-brass-barbed-hose-elbow-3-4-in","title":"Parker 269HB-12-12 Brass Barbed Hose Elbow 3\/4 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 269HB-12-12 is a brass barbed hose elbow fitting designed to connect flexible hose to a threaded male NPT port at a 90-degree angle. It accepts 3\/4 inch inside diameter hose on the barbed end and threads into a 3\/4 inch male NPT connection on the opposite end. The beaded hose barb profile creates a secure mechanical grip on the hose, reducing the chance of blowoff under pressure or vibration. Rated for service between -40 degrees F and 160 degrees F, this fitting is well suited for liquid transfer applications in HVAC, plumbing, and fluid handling systems. Licensed plumbers, HVAC technicians, and fluid system assemblers routinely install this type of fitting.\u003c\/p\u003e\n\u003cp\u003eThis elbow fitting is used in residential and light commercial applications where a directional change is needed between a flexible hose run and a fixed threaded port. Common install scenarios include condensate drain lines, hydronic system connections, pump inlet and outlet plumbing, and general water or coolant transfer lines. The 90-degree elbow configuration helps route hose around obstructions or along panel edges without kinking the hose.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBeaded barb design improves hose retention and reduces blowoff risk\u003c\/li\u003e\n  \u003cli\u003e3\/4 inch NPT male thread for direct connection to standard threaded ports\u003c\/li\u003e\n  \u003cli\u003eAccepts 3\/4 inch inside diameter flexible hose\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in water and coolant service\u003c\/li\u003e\n  \u003cli\u003eRated from -40 degrees F to 160 degrees F for broad service range\u003c\/li\u003e\n  \u003cli\u003e90-degree elbow geometry allows clean directional routing without hose kinking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation barbed elbow fitting for systems using 3\/4 inch inside diameter flexible hose with 3\/4 inch NPT threaded ports.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber or HVAC technician. Shut off fluid flow and relieve system pressure before installing or replacing any hose fitting. Apply thread sealant or PTFE tape to the male NPT threads per IPC and IFGC guidelines before threading into the port. Slide an appropriately rated hose clamp onto the hose before pressing the hose fully over the barb, then position and tighten the clamp just behind the bead for a secure, leak-free seal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Hose Barb x Male NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecial Feature\u003c\/strong\u003e: Beaded Hose Barb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 160 degrees F (71.1 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F (-40 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.36 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 269HB-12-12\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51543371579698,"sku":"269HB-12-12","price":39.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/608167390d4e5b412cb29f89e6ada4db_6d7211a7-19c0-4cf1-afda-0d5c08b4dc3b.jpg?v=1785917324","url":"https:\/\/voomisupply.com\/products\/parker-269hb-12-12-brass-barbed-hose-elbow-3-4-in","provider":"Voomi Supply","version":"1.0","type":"link"}