{"product_id":"parker-259ifhd-3-2-brass-inverted-45-flare-elbow-3-16-in","title":"Parker 259IFHD-3-2 Brass Inverted 45 Flare Elbow 3\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 259IFHD-3-2 is a brass inverted 45-degree flare elbow fitting designed for tubing connections in hydraulic, pneumatic, and fluid-transfer systems. It accepts a 3\/16-inch tube OD on the flare end and connects to a 1\/8-27 NPTF male port on the threaded end. Rated to 1900 psi maximum working pressure and 250 degrees F, this fitting is built for demanding service conditions. The brass construction offers corrosion resistance in fuel, oil, and refrigerant lines. At 0.88 inches overall length, it fits tight routing situations where a standard 90-degree elbow cannot be used. Meets SAE J51 and is UL Listed.\u003c\/p\u003e\n\u003cp\u003eThis fitting is used in residential and light commercial applications involving brake lines, fuel lines, HVAC refrigerant circuits, hydraulic controls, and compressed-air tubing runs. The inverted 45-degree flare design is common in automotive and OEM fluid-system plumbing, as well as field service repairs requiring a direction change at a male NPTF port. Plumbers, HVAC technicians, and hydraulic system technicians install this type of fitting when routing small-diameter tubing through confined equipment enclosures or panel assemblies.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInverted 45-degree flare x MNPTF ends for directional tube routing at a male port\u003c\/li\u003e\n  \u003cli\u003e1900 psi maximum working pressure for high-pressure fluid and pneumatic service\u003c\/li\u003e\n  \u003cli\u003eRated to 250 degrees F (121 degrees C) maximum working temperature\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance in fuel, oil, and refrigerant environments\u003c\/li\u003e\n  \u003cli\u003eMeets SAE J51 standard and is UL Listed\u003c\/li\u003e\n  \u003cli\u003eCompact 0.88-inch overall length suits tight plumbing runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service fitting for small-diameter tubing systems using 3\/16-inch OD tubing with a 1\/8-27 NPTF male port connection in hydraulic, pneumatic, or fluid-transfer applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber, HVAC technician, or qualified hydraulic systems technician familiar with flared tubing connections. Shut off and depressurize the system fully before removing or installing any fittings. Use a calibrated flaring tool to ensure the tube end meets SAE J51 inverted flare geometry before assembly. Do not overtighten; consult applicable industry torque guidelines for brass fittings of this thread size and apply thread sealant only if required by the system design and compatible with the fluid being conveyed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 45 Degree Inverted Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/8-27\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 1900 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J51, UL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 259IFHD-3-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51543381967154,"sku":"259IFHD-3-2","price":36.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/af866bcd88947b517026c7d736f226e5.jpg?v=1785917547","url":"https:\/\/voomisupply.com\/products\/parker-259ifhd-3-2-brass-inverted-45-flare-elbow-3-16-in","provider":"Voomi Supply","version":"1.0","type":"link"}