{"product_id":"parker-249ifhd-8-6-brass-inverted-male-elbow-1-2-in","title":"Parker 249IFHD-8-6 Brass Inverted Male Elbow 1\/2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 249IFHD-8-6 is a 90-degree inverted male elbow fitting machined from brass. It connects a 1\/2-inch OD flared tube to a 3\/8-18 NPTF male thread, providing a secure, leak-resistant transition in hydraulic and fluid-power line assemblies. The inverted flare design seats metal-to-metal, eliminating the need for thread sealant on the flare end. Rated to 750 psi maximum working pressure and 250 degrees F, this fitting is built for demanding service in mobile equipment, refrigeration, and compressed-air or fuel-line applications. Licensed plumbers, HVAC technicians, and hydraulic system technicians are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis elbow is suited for residential and light commercial systems where a direction change is needed in a flared-tube run. Common applications include fuel lines, hydraulic control circuits, refrigeration copper tubing connections, and pneumatic distribution lines where an inverted flare interface mates to a standard NPTF port. The 90-degree angle makes it practical in tight-clearance installations where a straight fitting cannot route tubing without excessive bending. No specific OEM model compatibility is stated by the supplier for this fitting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree inverted male elbow geometry for direction changes in confined spaces\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion in hydraulic fluid, fuel, and refrigerant service\u003c\/li\u003e\n  \u003cli\u003eFlare x MNPTF end connections — metal-to-metal flare seat on tube end\u003c\/li\u003e\n  \u003cli\u003e750 psi maximum working pressure rating\u003c\/li\u003e\n  \u003cli\u003e250 degrees F maximum working temperature\u003c\/li\u003e\n  \u003cli\u003eMeets SAE J51 standard; UL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for systems using 1\/2-inch OD inverted flare tubing and 3\/8-18 NPTF ported components.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed technician qualified for the fluid system being serviced — hydraulic, refrigeration, fuel, or pneumatic. De-pressurize and isolate the line completely before removing or installing any fitting. Use a backup wrench on the body to avoid twisting the tubing during tightening. Do not apply thread sealant or tape to the inverted flare seat; sealant is appropriate only on the NPTF male threads if required by the application.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 90 Degree Inverted Male Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.48 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.16 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J51; UL Listed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121707\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 249IFHD-8-6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540668481842,"sku":"249IFHD-8-6","price":15.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/34805211cf912ad87f0189ba0953f409.jpg?v=1785861394","url":"https:\/\/voomisupply.com\/products\/parker-249ifhd-8-6-brass-inverted-male-elbow-1-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}