{"product_id":"parker-213-24-hydraulic-hose-1-3-8-in-id-300-psi","title":"Parker 213-24 Hydraulic Hose 1-3\/8 in Id 300 Psi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 213-24 is a heavy-duty hydraulic hose engineered for high-pressure air brake and fluid transfer applications. Built from synthetic rubber, it measures 1.375 inches inner diameter and 1.73 inches outer diameter, with a maximum working pressure of 1200 psi. The hose is sold in 1-foot increments with a 5-foot minimum cut length from a 55-foot total coil. It is rated for a wide operating temperature range of -50 degrees F to 302 degrees F, making it suitable for demanding under-vehicle and industrial environments. HVAC techs, fleet maintenance professionals, and hydraulic system installers work with this product in high-cycle, high-pressure service conditions.\u003c\/p\u003e\n\u003cp\u003eThis hose is designed for air brake systems and hydraulic lines where DOT and SAE compliance is required. The -24 hose size designation corresponds to a 1-3\/8 inch ID, placing it in the larger-diameter range commonly used on commercial trucks, heavy equipment, and industrial machinery. Its synthetic rubber construction resists abrasion, weathering, and fluid degradation under continuous service. The 7.5-inch minimum bend radius allows routing through tight chassis runs without kinking or compromising pressure integrity.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1200 psi maximum working pressure for demanding hydraulic and air brake service\u003c\/li\u003e\n  \u003cli\u003eSynthetic rubber construction resists abrasion, oil, and weathering\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -50 degrees F to 302 degrees F\u003c\/li\u003e\n  \u003cli\u003eMeets DOT FMVSS 106 Air Brake-AI and SAE J1402 AI standards\u003c\/li\u003e\n  \u003cli\u003e7.5-inch minimum bend radius supports tight routing applications\u003c\/li\u003e\n  \u003cli\u003eSold in 1-foot increments with a 5-foot minimum cut length from a 55-foot coil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service hose for commercial air brake systems and hydraulic assemblies requiring a -24 hose size (1-3\/8 inches ID) with DOT FMVSS 106 and SAE J1402 AI certification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified hydraulic or fleet maintenance technician. Depressurize the hydraulic or air brake system completely before cutting, fitting, or replacing any hose section. Use properly rated end fittings matched to the -24 hose size and rated for 1200 psi or greater. Do not exceed the 7.5-inch minimum bend radius during routing, and avoid contact with sharp edges or heat sources that could damage the outer jacket.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Series\u003c\/strong\u003e: 213\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Size\u003c\/strong\u003e: -24\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Diameter\u003c\/strong\u003e: 1.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Diameter\u003c\/strong\u003e: 1.73 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 1200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Coil Length\u003c\/strong\u003e: 55 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Cut Length\u003c\/strong\u003e: 5 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Temperature\u003c\/strong\u003e: -50 degrees F (-45 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 302 degrees F (150 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Color\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Material\u003c\/strong\u003e: Synthetic Rubber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DOT FMVSS 106 Air Brake-AI, SAE J1402 AI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.51 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 213-24\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51544625512754,"sku":"213-24","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/27038da607364fb2cdb886004ed0255a_e35dba2f-1507-474a-866d-87f8aa95509a.jpg?v=1785931903","url":"https:\/\/voomisupply.com\/products\/parker-213-24-hydraulic-hose-1-3-8-in-id-300-psi","provider":"Voomi Supply","version":"1.0","type":"link"}