{"product_id":"parker-1717406-hydraulic-hose-female-pipe-rigid-fitting","title":"Parker 1717406 Hydraulic Hose Female Pipe Rigid Fitting","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 1717406 is a female pipe rigid fitting designed for hydraulic hose assemblies operating at up to 5,000 psi. Machined from steel with a straight body configuration, this fitting uses NPTF threaded connections to form a leak-resistant seal without additional sealant tape in most applications. The 1\/4 inch hose end mates to standard 1\/4 inch hydraulic hose, while the 1\/8 inch NPTF thread connects to the port or component side. With a maximum flow rate of 3.00 GPM and an overall length of 1.41 inches, this fitting is sized for compact, high-pressure hydraulic circuits. It is installed by hydraulic system technicians and mobile equipment mechanics.\u003c\/p\u003e\n\u003cp\u003eThe 1717406 is rated for mobile hydraulic applications where reliable, rigid pipe-end connections are required. Typical use cases include snow plow hydraulic systems, truck and trailer hydraulic connections, and other mobile equipment circuits. The straight fitting geometry suits direct port-to-hose routing without angular offset. The steel construction handles the mechanical stress and pressure cycling common in vehicle-mounted and outdoor hydraulic systems. This fitting is sold individually and conforms to ISO 7241-1 Series A standards under Parker Series 6600.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5,000 psi maximum working pressure for high-pressure hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eNPTF threaded connection provides a pressure-tight mechanical seal\u003c\/li\u003e\n  \u003cli\u003eSteel construction resists mechanical stress and pressure cycling in mobile environments\u003c\/li\u003e\n  \u003cli\u003eStraight body profile for direct hose-to-port routing\u003c\/li\u003e\n  \u003cli\u003eMaximum flow rate of 3.00 GPM suits compact mobile hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 7241-1 Series A standard, Parker Series 6600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with mobile hydraulic applications including snow plows and truck and trailer hydraulic connections. Accepts 1\/4 inch hydraulic hose on the hose end and 1\/8 inch NPTF threaded ports on the component side.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified hydraulic system technician. Depressurize and bleed the hydraulic system fully before disconnecting or installing any fittings. NPTF threads rely on thread-form interference for sealing; inspect threads for damage before installation and torque to the fitting manufacturer's recommended value using a calibrated torque wrench. Verify the system pressure rating does not exceed the 5,000 psi working pressure of this fitting after reassembly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Female Pipe Rigid Fitting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/8 inch NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 5,000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate\u003c\/strong\u003e: 3.00 GPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.41 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 7241-1 Series A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 6600\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.057 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1717406\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540309115186,"sku":"6602-2-4","price":36.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cf0867d556d383356667a533f791f504.jpg?v=1785851790","url":"https:\/\/voomisupply.com\/products\/parker-1717406-hydraulic-hose-female-pipe-rigid-fitting","provider":"Voomi Supply","version":"1.0","type":"link"}