{"product_id":"parker-151f-10-8-brass-flared-male-run-tee-5-8-in","title":"Parker 151F-10-8 Brass Flared Male Run Tee 5\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 151F-10-8 is a brass male run tee fitting designed for flared tube connections in refrigeration, HVAC, and fluid-transfer applications. It connects 5\/8-inch OD tubing using a 45-degree SAE flare on both tube ends, with a 1\/2-14 NPTF male pipe thread on the branch outlet. Rated to 650 psi maximum working pressure and 250 degrees F, this fitting handles the pressure and temperature demands common in refrigerant line sets and hydraulic service work. Licensed HVAC technicians and plumbers install this type of fitting when a branch takeoff is required in a flared tubing run without cutting and reswaging the main line.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for residential and light commercial HVAC systems, refrigeration equipment, and pneumatic or hydraulic lines where SAE 45-degree flare connections are standard. The male NPT branch threads into a valve, manifold, or ported component, while the in-line flare ends maintain continuity along the main tubing run. Typical applications include refrigerant distribution manifolds, fuel gas service, and pressurized fluid systems where brass construction is acceptable for the fluid media.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree SAE flare tube ends comply with SAE J512 and SAE J513 standards\u003c\/li\u003e\n  \u003cli\u003e1\/2-14 NPTF male pipe thread branch connection seals without a separate sealant when mated to a matched NPTF port\u003c\/li\u003e\n  \u003cli\u003eRated to 650 psi maximum working pressure for demanding refrigerant and fluid service\u003c\/li\u003e\n  \u003cli\u003eMaximum working temperature of 250 degrees F (121 degrees C) suits most HVAC and refrigeration environments\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance and compatibility with common refrigerants and fluids\u003c\/li\u003e\n  \u003cli\u003eUL Listed; meets SAE J512, SAE J513 standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard SAE 45-degree flare male run tee for use with 5\/8-inch OD tubing and 1\/2-14 NPTF ported components in refrigeration, HVAC, and fluid-transfer systems where SAE J512 and SAE J513 flare fittings are specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed HVAC technician or plumber. Depressurize and recover any refrigerant or fluid from the system before opening flare connections. Ensure tubing ends are cut cleanly, deburred, and flared to the correct 45-degree angle using a calibrated flaring tool before assembly. Tighten flare nuts to fitting spec using two wrenches to prevent tube rotation; do not overtighten brass fittings.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male Run Tee\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 650 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (121 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J512, SAE J513, UL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 151F-10-8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540069089586,"sku":"151F-10-8","price":59.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/57c94324c71135dcd32f163ceffbacf7.jpg?v=1785846047","url":"https:\/\/voomisupply.com\/products\/parker-151f-10-8-brass-flared-male-run-tee-5-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}