{"product_id":"parker-125hblsv-4-4-barbed-hose-fitting-1-4-inch-npt","title":"Parker 125HBLSV-4-4 Barbed Hose Fitting 1\/4 Inch Npt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 125HBLSV-4-4 is a brass barbed hose fitting in a male connector configuration, designed for fluid transfer applications in HVAC, plumbing, and industrial service. It features a hose barb on one end and a male swivel NPT thread on the other, allowing secure connection between flexible hose and threaded pipe fittings. The fitting accommodates 1\/4 inch inside diameter hose and carries a 1\/4 inch NPT thread. Rated for service between -40 degrees F and 160 degrees F, it suits a wide range of liquid and low-pressure gas line applications. Licensed plumbers, HVAC technicians, and mechanical contractors install this type of fitting in both new construction and service work.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for residential and light commercial applications where flexible hose must transition to a threaded pipe connection. Typical install scenarios include condensate drain lines, refrigerant oil lines, water supply connections, and low-pressure fluid circuits. The male swivel NPT design allows the fitting to be threaded into a female port without rotating the connected hose, reducing installation stress on the hose assembly. The all-brass construction makes it appropriate for potable water systems, hydronic lines, and corrosion-sensitive environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass construction for corrosion resistance in wet and hydronic service environments\u003c\/li\u003e\n  \u003cli\u003eMale swivel NPT thread eliminates hose twist during installation\u003c\/li\u003e\n  \u003cli\u003eFits 1\/4 inch ID hose with a 0.29 inch barb diameter for a secure grip\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -40 degrees F to 160 degrees F\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch NPT thread standard for broad compatibility with threaded pipe fittings\u003c\/li\u003e\n  \u003cli\u003eCompact overall length of 2.14 inches suits tight-clearance installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for systems using 1\/4 inch ID flexible hose with 1\/4 inch NPT threaded ports.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed plumbers or HVAC technicians following applicable IPC and IFGC guidelines. Shut off fluid supply and relieve system pressure before removing or installing any hose fitting. Apply thread sealant or PTFE tape to the NPT threads per local code requirements. Do not overtighten the swivel nut; hand-tighten and then wrench-snug to avoid cracking the brass hex.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Hose Barb x Male Swivel NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Outside Diameter\u003c\/strong\u003e: 0.29 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 0.29 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Head Size\u003c\/strong\u003e: 0.6875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.14 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 160 degrees F (71.1 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F (-40 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 40141734\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 125HBLSV-4-4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51542314549554,"sku":"125HBLSV-4-4","price":23.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a9f4318b31c501579ed65ba98762a342_a0203cc6-6d3d-4e6f-b408-bfa368dbac45.jpg?v=1785897859","url":"https:\/\/voomisupply.com\/products\/parker-125hblsv-4-4-barbed-hose-fitting-1-4-inch-npt","provider":"Voomi Supply","version":"1.0","type":"link"}