{"product_id":"parker-08fs5c2332acf-solenoid-valve-1-2-in-npt-brass","title":"Parker 08FS5C2332ACF Solenoid Valve 1\/2 in Npt Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER 08FS5C2332ACF is a direct-acting, normally closed solenoid valve designed for control of hot water and steam in commercial and industrial fluid systems. The brass body houses an EPDM seal rated to 300 degrees F and supports a maximum working pressure of 50 psi. With a Cv factor of 3.6 and a 1\/2-inch orifice, the valve delivers reliable flow control for high-temperature media. It accepts a wide range of coil voltages including 12 Vdc, 24 Vdc, 24\/60 Vac, 120 Vdc, 120\/60 to 110\/50 Vac, and 240\/60 to 220\/50 Vac, making it adaptable to varied control-circuit configurations. Licensed plumbers, HVAC technicians, and industrial pipefitters typically install this valve as part of zone control or process-isolation assemblies.\u003c\/p\u003e\n\u003cp\u003eThis valve is suited for residential and commercial hot water and steam applications where a fail-closed, de-energized-closed action is required. The 1\/2-inch NPT threaded connection integrates directly into standard pipe configurations. The 11-watt coil draw keeps heat generation low in panel-mounted or enclosed installations. CSA, UL, and NEMA 4X ratings make it appropriate for wet or wash-down environments where listed components are required by code or specification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-acting, normally closed operation — closes immediately on power loss\u003c\/li\u003e\n  \u003cli\u003eBrass body with EPDM seal rated to 300 degrees F for hot water and steam service\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch NPT port with 0.5-inch orifice and Cv of 3.6 for high-flow capacity\u003c\/li\u003e\n  \u003cli\u003eMulti-voltage coil compatibility: 12 Vdc, 24 Vdc, 24\/60 Vac, 120 Vdc, 120\/60-110\/50 Vac, 240\/60-220\/50 Vac\u003c\/li\u003e\n  \u003cli\u003e11-watt coil wattage minimizes heat buildup in control enclosures\u003c\/li\u003e\n  \u003cli\u003eCSA Certified, UL Listed, and NEMA 4X rated for use in demanding environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for hot water and steam applications. Designed as a direct-acting solenoid valve replacement or new installation for systems requiring a normally closed, 1\/2-inch NPT brass valve with EPDM sealing and multi-voltage coil support.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable local codes and ASME or IFGC guidelines. Shut off and depressurize the system and allow it to cool completely before removing or installing the valve. Verify coil voltage matches the control circuit before energizing. Note that solenoid coils are sold separately and are not included with this valve body.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Type\u003c\/strong\u003e: Direct Acting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePort Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnactuated State\u003c\/strong\u003e: Normally Closed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrifice Size\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCv Factor\u003c\/strong\u003e: 3.6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 50 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Operating Pressure Differential\u003c\/strong\u003e: 1 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 12 Vdc, 24 Vdc, 24\/60 Vac, 120 Vdc, 120\/60 to 110\/50 Vac, 240\/60 to 220\/50 Vac\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e: 11 watts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Material\u003c\/strong\u003e: Ethylene Propylene Diene Monomer (EPDM)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoil Included\u003c\/strong\u003e: No (coils sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: CSA Certified, UL Listed, NEMA 4X\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 08FS5C2332ACF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51542719562034,"sku":"08FS5C2332ACF","price":445.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3a67e6c75c40b18e81e55a74f08f4a02_9599f470-3d8d-4c52-ae88-a5b02e5868d9.jpg?v=1785905273","url":"https:\/\/voomisupply.com\/products\/parker-08fs5c2332acf-solenoid-valve-1-2-in-npt-brass","provider":"Voomi Supply","version":"1.0","type":"link"}