{"product_id":"osg-hp411-2362-square-end-mill-4-flute-solid-carbide","title":"Osg HP411-2362 Square End Mill 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG HP411-2362 is a solid carbide square end mill designed for high-performance material removal in steel, cast iron, and hardened materials. It features a 0.2362 inch diameter with a matching 0.2362 inch shank diameter and a 0.3543 inch length of cut, placing it in the stub-length category for rigidity in tight setups. The four-flute, right-hand spiral configuration runs a 30-degree helix angle, promoting efficient chip evacuation while maintaining a smooth cutting action. A TiAlN coating provides thermal resistance and extended tool life in ferrous and hardened workpiece applications. This end mill is center-cutting and suitable for plunge, slot, and profile operations.\u003c\/p\u003e\n\u003cp\u003eThe HP411-2362 is engineered for use on CNC machining centers and manual mills where close-tolerance work in steel, cast iron, or hardened materials is required. The extended-reach design, with a neck length of approximately 30 mm and a neck diameter of 5.85 mm, allows access to features with moderate depth requirements without sacrificing stability. This tool is appropriate for job shops, tool rooms, and production environments running ferrous alloys and hardened steels. It is sold as a single-end tool and packaged individually.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide micrograin substrate for rigidity and wear resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003eTiAlN coating for high-temperature performance and extended tool life in ferrous applications\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand spiral flute promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting geometry allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eExtended-reach neck design provides access to moderate-depth features\u003c\/li\u003e\n  \u003cli\u003eStub-length classification maximizes rigidity in short-overhang setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard ER or straight-shank toolholders accepting a 6 mm or 0.2362 inch shank diameter. Primary workpiece materials include steel, cast iron, and hardened materials per material codes P, K, and H. Part of the OSG HP411 series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before mounting or removing the tool. Use a clean, undamaged collet or end mill holder sized to the 0.2362 inch shank diameter to prevent runout. Follow the machine tool and toolholder manufacturer guidelines for minimum insertion depth and recommended clamping torque.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.2362 inches (6.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.3543 inches (9.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2362 inches (6.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 90.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 30.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 5.85 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron, Hardened Materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HP411\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 4.5 x 0.25 x 0.25 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HP411-2362\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51728564584754,"sku":"HP411-2362","price":67.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dee327a8c8a8374d8b95ee21b7648039.jpg?v=1788693407","url":"https:\/\/voomisupply.com\/products\/osg-hp411-2362-square-end-mill-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}