{"product_id":"osg-hp245-3583-solid-carbide-jobber-drill-bit-0-3583-in","title":"Osg HP245-3583 Solid Carbide Jobber Drill Bit 0.3583 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe OSG HP245-3583 is a jobber-length drill bit designed for precision hole-making in demanding materials. Built from solid carbide, it delivers the rigidity and wear resistance needed for production drilling in hardened steels, cast iron, stainless steel, and similar difficult-to-machine workpieces. The 140-degree split point reduces walking and lowers thrust requirements at entry. The WD1 coating provides added surface hardness and lubricity to extend tool life between regrinds. At 9.10 mm (0.3583 inches) diameter with a 103.00 mm overall length, this bit fits standard drill chucks and CNC machining center spindles running coolant-free applications.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for metalworking and machining operations in job shop, production, and maintenance-repair environments. It is used in vertical machining centers, drill presses, and manual or CNC lathes where a 10.00 mm shank and jobber-length reach are required. The 5xD flute-to-diameter ratio provides adequate chip clearance for moderate-depth holes without the need for peck cycles in most ductile metals. Licensed machinists, toolroom technicians, and precision fabrication shops are the primary users of this tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and extended tool life in hard materials\u003c\/li\u003e\n\u003cli\u003e140-degree drill point reduces entry walking and decreases thrust load\u003c\/li\u003e\n\u003cli\u003eWD1 coating adds surface hardness and reduces built-up edge formation\u003c\/li\u003e\n\u003cli\u003eR-thinned web improves chip flow and reduces axial cutting force\u003c\/li\u003e\n\u003cli\u003e5xD flute-to-diameter ratio balances chip evacuation with core strength\u003c\/li\u003e\n\u003cli\u003e10.00 mm shank diameter fits standard ER collets and drill chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct tooling selection for machining centers, drill presses, and CNC turning centers accepting a 10.00 mm shank jobber-length drill bit in the 0.3500 to 0.4000 inch (9.00 to 10.00 mm) diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or toolroom technicians. Secure the shank fully into the collet or chuck before operation and verify runout with a dial indicator where tolerances are critical. Power down and lock out the spindle before changing tooling. Do not exceed the recommended feed and speed parameters for the workpiece material and machine horsepower rating.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.3583 inches (9.10 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 103.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 61.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: WD1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: R-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0060 to +0.0210 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size Range\u003c\/strong\u003e: 0.3500 to 0.4000 inches (9.00 to 10.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HP245-3583\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51731901776178,"sku":"HP245-3583","price":131.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/17fac3bcdd49fd228104c77863b3f6e3_1b2df617-d5bc-4d1d-9848-fe3c45c82f39.jpg?v=1788736330","url":"https:\/\/voomisupply.com\/products\/osg-hp245-3583-solid-carbide-jobber-drill-bit-0-3583-in","provider":"Voomi Supply","version":"1.0","type":"link"}