{"product_id":"osg-hp245-1772-jobber-drill-bit-0-1772-in-solid-carbide","title":"Osg HP245-1772 Jobber Drill Bit 0.1772 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG HP245-1772 is a solid carbide jobber length drill bit designed for high-performance drilling in metalworking applications. It measures 0.1772 inches (4.50 mm) in diameter and features a 140-degree R-thinned point that promotes self-centering and reduces thrust during entry. The WD1 coating enhances wear resistance and tool life in ferrous materials. The straight-cylindrical shank and spiral flute geometry support accurate chip evacuation in blind hole and through-hole operations. This bit is sized at wire gauge number 16 and falls in the 0.1500 to 0.2000 inch diameter range of the HP245 series. It is installed by machinists and toolroom technicians working with CNC or manual drilling equipment.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for production and job shop environments where consistent hole quality in steel, alloy steel, and cast iron is required. It handles blind hole drilling, cross-hole drilling, standard through-hole drilling, and self-centering applications. The 5xD flute-to-diameter ratio gives it sufficient flute length for moderate-depth holes without sacrificing rigidity. The overall length of 74.00 mm (approximately 2.91 inches) and 36.00 mm (approximately 1.42 inches) flute length are appropriate for general-purpose jobber applications on milling machines, drill presses, and CNC machining centers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for superior hardness and wear resistance in ferrous workpiece materials\u003c\/li\u003e\n  \u003cli\u003e140-degree R-thinned point promotes self-centering and reduces walking on entry\u003c\/li\u003e\n  \u003cli\u003eWD1 coating improves tool life when drilling steel and cast iron\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks and collet holders with 6.00 mm shank diameter\u003c\/li\u003e\n  \u003cli\u003eRegular spiral flute with tapered web configuration supports efficient chip removal\u003c\/li\u003e\n  \u003cli\u003eRated for blind hole, cross-hole, through-hole drilling, and self-centering tool applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in drilling steel, alloy steel, and cast iron workpieces. Primary workpiece material codes P and K per ISO classification. Compatible with standard drill chucks and collet systems accepting a 6.00 mm straight-cylindrical shank. Part of the OSG HP245 series covering the 4.00 to 5.00 mm diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis drill bit is installed by machinists using drill chucks or precision collet holders on CNC machining centers, drill presses, or milling machines. Ensure the spindle and workpiece are properly secured before operation. Coolant-through is not supported on this bit, so external coolant or cutting fluid application is recommended when drilling ferrous materials to manage heat buildup. Inspect the cutting edges for wear or chipping before each use and replace when diameter tolerance or point geometry is compromised.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1772 inches (4.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Gauge Size\u003c\/strong\u003e: No. 16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: R-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: WD1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 74.00 mm (approximately 2.91 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 36.00 mm (approximately 1.42 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: +0.004 to +0.016 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Alloy Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Blind Hole, Cross Hole, Drilling, Self-Centering\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HP245\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HP245-1772\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51739189051698,"sku":"HP245-1772","price":72.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/17fac3bcdd49fd228104c77863b3f6e3_dd048fb0-eca8-4e7e-8c7f-2228117058cb.jpg?v=1788811057","url":"https:\/\/voomisupply.com\/products\/osg-hp245-1772-jobber-drill-bit-0-1772-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}