{"product_id":"osg-8696600-taper-length-drill-bit-0-2362-in-solid-carbide","title":"Osg 8696600 Taper Length Drill Bit 0.2362 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 8696600 is a taper length twist drill bit built from solid carbide for high-performance drilling in demanding applications. It features a 0.2362 inch (6.00 mm) diameter with a 140-degree split point that reduces walking and improves hole entry accuracy. The EgiAs coating provides enhanced wear resistance and heat management during extended cutting cycles. Right-hand spiral flutes evacuate chips efficiently, and the through-coolant capability allows cutting fluid delivery directly to the cutting zone. At 0.085 pounds, this bit is designed for use in CNC machining centers and production drilling environments where consistent hole quality and tool life are required.\u003c\/p\u003e\n\u003cp\u003eThis drill bit suits precision metalworking and industrial fabrication applications where tight tolerances and deep hole drilling are required. The 8xD flute-to-diameter ratio and 78.00 mm flute length support deeper cuts without sacrificing rigidity. The straight shank with a 6.00 mm diameter fits standard collet chucks and drill chucks common in CNC machining setups. X-thinned web geometry reduces thrust force, making it effective on harder alloys, stainless steels, and other difficult-to-machine materials typically encountered in aerospace, automotive, and general metalworking operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for superior hardness and wear resistance in production drilling\u003c\/li\u003e\n  \u003cli\u003e140-degree drill point angle with X-thinned web reduces thrust and improves self-centering\u003c\/li\u003e\n  \u003cli\u003eEgiAs coating enhances heat and wear resistance for longer tool life\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant capability delivers cutting fluid directly to the cutting edge\u003c\/li\u003e\n  \u003cli\u003e8xD flute-to-diameter ratio supports deep hole drilling with efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut spiral flute for standard clockwise spindle operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement taper length drill bit in the OSG Series 6530 line, compatible with standard 6.00 mm straight shank collet chucks and drill chucks on CNC machining centers and manual drill presses.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by a qualified machinist or CNC programmer familiar with carbide tooling requirements. Ensure the spindle and tool holder are clean and properly secured before mounting the bit to prevent runout that can chip carbide. Confirm coolant lines are clear and flow is active before engaging through-coolant cycles. Carbide tooling is brittle and should not be used in hand-held drilling operations or in machines with excessive spindle play.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.2362 inches (6.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 78.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 128.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: EgiAs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: X-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length x Diameter Ratio\u003c\/strong\u003e: 8xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 6530\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.15 inches L x 0.55 inches W x 0.45 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.085 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8696600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51730688049458,"sku":"8696600","price":338.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d31008abec274f4e968ff2dec495352b_fb56e5ff-6bf4-40e6-aa88-9950b52c1f5c.jpg?v=1788721424","url":"https:\/\/voomisupply.com\/products\/osg-8696600-taper-length-drill-bit-0-2362-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}