{"product_id":"osg-8693350-solid-carbide-jobber-drill-13-50-mm","title":"Osg 8693350 Solid Carbide Jobber Drill 13.50 Mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe OSG 8693350 is a solid carbide jobber-length drill bit designed for high-performance drilling in demanding metalworking applications. It features a 13.50 mm diameter (0.5315 inch) cutting edge ground to a 140-degree point angle with R-thinned web geometry for improved self-centering and reduced thrust. The EgiAs coating provides thermal and wear resistance suited to aggressive cutting cycles. With an overall length of 176.00 mm and a flute length of 108.00 mm, this drill is configured for a 5xD depth-to-diameter ratio. It ships as a single unit and is targeted at machinists and tool-room technicians running CNC or manual drilling operations on ferrous and exotic materials.\u003c\/p\u003e\u003cp\u003eThis drill is engineered for use on steel, alloy steel, cast iron, titanium, and titanium alloys, covering ISO material codes P, K, S, and H. Typical applications include blind hole drilling, cross-hole drilling, and self-centering operations where a split-point geometry reduces walking on entry. The straight-cylindrical shank at 14.00 mm diameter seats directly in standard drill chucks or collet systems. Internal coolant-through capability supports higher feed rates and extended tool life when used in machining centers equipped with through-spindle coolant.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e13.50 mm cutting diameter with a tolerance of +0 to -0.027 mm for consistent hole sizing\u003c\/li\u003e\n\u003cli\u003e140-degree point angle with R-thinned, tapered web for self-centering entry and reduced thrust load\u003c\/li\u003e\n\u003cli\u003eEgiAs coating for thermal resistance and extended wear life on hard and abrasive workpiece materials\u003c\/li\u003e\n\u003cli\u003eCoolant-through design supports high-feed machining and chip evacuation in blind hole applications\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting, regular spiral, two-flute configuration for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003e14.00 mm straight-cylindrical shank for compatibility with standard chucks and collet holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThe OSG 8693350 belongs to OSG Series 6510 and is suited for workpiece materials coded P (steel), K (cast iron), S (titanium and titanium alloys), and H (hardened materials) per ISO designation. Applicable to blind hole, cross-hole, and general drilling operations on machining centers and drill presses equipped with through-spindle or flood coolant.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed with the machine in a full stop, locked-out state per applicable OSHA and shop lockout\/tagout procedures. Ensure the shank seating surface and collet or chuck bore are clean and free of chips before securing the tool. Verify runout at the cutting edge after installation to avoid premature wear or oversize holes. Coolant-through connections should be confirmed and pressure-tested before initiating a drilling cycle.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 13.50 mm (0.5315 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: R-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 176.00 mm (7.25 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 108.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 14.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: EgiAs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0 to -0.027 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Alloy Steel, Cast Iron, Titanium, Titanium Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 6510\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.595 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8693350\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51753928491314,"sku":"8693350","price":670.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/36adc2d2617bb4917925c3f830045324_4b190105-d6ab-4715-95d1-7804d2536b21.jpg?v=1788942119","url":"https:\/\/voomisupply.com\/products\/osg-8693350-solid-carbide-jobber-drill-13-50-mm","provider":"Voomi Supply","version":"1.0","type":"link"}