{"product_id":"osg-8667500-solid-carbide-jobber-drill-5-00-mm-wxl","title":"Osg 8667500 Solid Carbide Jobber Drill 5.00 Mm Wxl","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe OSG 8667500 is a solid carbide jobber-length drill bit designed for precision drilling in demanding production and fabrication environments. It features a 140-degree split-point geometry and a WXL coating that improves wear resistance and reduces heat buildup at the cutting edge. The 5.00 mm diameter (0.1969 inches) bit runs a 2-flute right-hand spiral configuration with coolant-through capability, making it well suited for high-speed CNC machining centers and production drilling operations. Machinists, tool and die makers, and CNC operators are the primary users of this bit.\u003c\/p\u003e\u003cp\u003eThis jobber drill is intended for use in metal cutting applications where consistent hole quality and extended tool life are required. The 5xD flute-to-diameter ratio and 45.00 mm flute length provide adequate chip evacuation in through-hole and blind-hole drilling. Coolant-through capability supports deeper cut cycles and higher feed rates without sacrificing surface finish. The straight-cylindrical shank fits standard drill chucks and collet holders compatible with 5.00 mm shanks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003eWXL coating reduces friction and extends cutting edge life\u003c\/li\u003e\n\u003cli\u003e140-degree point angle promotes self-centering and reduces thrust force\u003c\/li\u003e\n\u003cli\u003eCoolant-through design supports elevated feed rates and deeper holes\u003c\/li\u003e\n\u003cli\u003eRight-hand, 2-flute spiral configuration for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard collet and chuck tooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and manual machines equipped with tooling that accepts a 5.00 mm straight-cylindrical shank. Falls within the 5.00 mm to 6.00 mm drill bit size range and the 0.1500 to 0.2000 decimal inch range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed with the machine in a fully de-energized and locked-out state. A qualified machinist or CNC operator should verify runout and shank seating before beginning a cutting cycle. Confirm that coolant-through lines are properly connected and flowing before engaging the spindle at elevated feed rates. Follow applicable shop safety standards and machine manufacturer guidelines for carbide tooling handling and storage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5.00 mm (0.1969 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 95.00 mm (3.74 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 45.00 mm (1.77 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: WXL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8667500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51751987806514,"sku":"8667500","price":199.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b9de5c30bcae4847cfe1ddf5430a47a5_c538a244-5aee-4d4c-a5bf-69a4f64cee4f.jpg?v=1788925027","url":"https:\/\/voomisupply.com\/products\/osg-8667500-solid-carbide-jobber-drill-5-00-mm-wxl","provider":"Voomi Supply","version":"1.0","type":"link"}