{"product_id":"osg-6600400-square-end-mill-5-16-inch-3-flute-pm","title":"Osg 6600400 Square End Mill 5\/16 Inch 3 Flute Pm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe OSG 6600400 is a square end mill designed for material removal in milling operations on machining centers and manual mills. Built from powdered metal (PM), this tool offers improved wear resistance and toughness compared to standard high-speed steel. It features a 5\/16 inch cutting diameter, a 3\/4 inch length of cut, and a 50-degree helix angle that promotes efficient chip evacuation and reduced cutting forces. The center-cutting design allows the tool to plunge directly into a workpiece, adding flexibility to its application. Machinists and CNC operators in job shops, production environments, and tool rooms are the primary users of this end mill.\u003c\/p\u003e\u003cp\u003eThe OSG 6600400 is suited for slotting, profiling, and peripheral milling in a range of ferrous and non-ferrous materials. Its 3\/8 inch shank diameter fits standard collet chucks, end mill holders, and shrink-fit tooling. The regular-length geometry and spiral flute configuration make it a practical choice for general-purpose milling where a balance of rigidity and reach is needed. This is a single-end, right-hand cut, right-hand flute tool in the OSG Series 660 line, intended for production-grade cutting applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePowdered metal construction for enhanced wear resistance over standard HSS\u003c\/li\u003e\n\u003cli\u003e50-degree helix angle for aggressive chip evacuation and smooth cutting action\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capability allows direct plunge entry into the workpiece\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral flute configuration\u003c\/li\u003e\n\u003cli\u003e3\/8 inch shank fits standard collet chucks and end mill holders\u003c\/li\u003e\n\u003cli\u003eUncoated finish — suitable for use with cutting fluids or dry in compatible materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose replacement or production end mill for machining centers and manual mills accepting a 3\/8 inch shank. Part of the OSG Series 660 powdered metal end mill line.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following standard toolholding procedures. Ensure the machine spindle is fully stopped and locked out before changing tooling. Seat the shank to the full recommended engagement depth in the collet or holder and torque the retention mechanism per the toolholder manufacturer specification. Inspect the cutting edges for chips or damage before each use and confirm runout is within acceptable limits before beginning a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Powdered Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 50 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 660\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6600400\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51750383550770,"sku":"6600400","price":81.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/232177cd8ddc8469d1faf60291717a99.jpg?v=1788915181","url":"https:\/\/voomisupply.com\/products\/osg-6600400-square-end-mill-5-16-inch-3-flute-pm","provider":"Voomi Supply","version":"1.0","type":"link"}