{"product_id":"osg-653025612-taper-length-drill-bit-0-2571-in-solid-carbide","title":"Osg 653025612 Taper Length Drill Bit 0.2571 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 653025612 is a taper length twist drill bit engineered for deep-hole drilling applications requiring extended reach beyond standard jobber-length geometry. Built from solid carbide, this bit delivers hardness and heat resistance suited to ferrous and non-ferrous materials in production and maintenance environments. The drill measures 0.2571 inches in diameter (Letter F, 6.53 mm) with a 140-degree split point and an EgiAs coating for improved surface lubricity and tool life. Coolant-through capability supports high-speed, chip-clearing operation in CNC machining centers and deep-bore setups. Right-hand spiral flutes evacuate chips efficiently, reducing heat buildup and deflection in taper-length configurations.\u003c\/p\u003e\n\u003cp\u003eThis bit fits production machining, tool-and-die, and maintenance-repair operations where standard-length drills cannot reach. The 10xD flute-length-to-diameter ratio and X-thinned web reduce thrust and improve penetration in materials such as steel, cast iron, and aluminum. The straight shank with an 8.00 mm (0.315 inch) shank diameter seats directly in standard chucks and collets on CNC machining centers and drill presses. It is sold individually and is appropriate for shops running tight-tolerance work where carbide rigidity and point accuracy are critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for superior hardness, heat resistance, and tool life versus high-speed steel\u003c\/li\u003e\n  \u003cli\u003e140-degree split point reduces walking and lowers entry thrust on flat and curved surfaces\u003c\/li\u003e\n  \u003cli\u003eEgiAs coating improves lubricity and resists built-up edge in steel and cast materials\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design channels cutting fluid directly to the cutting edge in deep-hole applications\u003c\/li\u003e\n  \u003cli\u003eX-thinned web reduces axial thrust and improves chip flow in taper-length configurations\u003c\/li\u003e\n  \u003cli\u003e10xD flute-length-to-diameter ratio extends reach for deep-bore drilling without step-drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and multi-spindle equipment accepting a straight shank with an 8.00 mm shank diameter. Compatible with standard ER and DA collet chucks and keyless drill chucks sized for that shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and setup should be performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully stopped and de-energized before inserting or removing the bit from the chuck or collet holder. Verify collet or chuck runout is within acceptable tolerance before running at speed, as carbide is brittle and sensitive to lateral load from excessive runout. Confirm coolant-through passages are clear and supply pressure is set before initiating deep-hole cycles.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Decimal Inch)\u003c\/strong\u003e: 0.2571 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Letter)\u003c\/strong\u003e: F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (mm)\u003c\/strong\u003e: 6.53 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: EgiAs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 8.00 mm (0.315 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 87.00 mm (3.43 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 140.00 mm (5.51 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 10xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: X-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 6530\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 653025612\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51737399951666,"sku":"653025612","price":291.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/87f7ff7c8fa7b0a8efc9ab21e88b1f0e_97d3f533-8a40-4010-9394-0641fce19538.jpg?v=1788788052","url":"https:\/\/voomisupply.com\/products\/osg-653025612-taper-length-drill-bit-0-2571-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}