{"product_id":"osg-5426100-square-end-mill-11-64-in-4-flute-cobalt","title":"Osg 5426100 Square End Mill 11\/64 in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 5426100 is a cobalt double-end square end mill designed for milling ferrous and difficult-to-machine materials where high heat resistance is required. Built from M42 cobalt high-speed steel, this tool offers a 0.1719-inch (11\/64 inch) cutting diameter with a 0.5-inch length of cut and a 3\/8-inch shank diameter. The 30-degree spiral flute geometry promotes efficient chip evacuation during side milling, slotting, and profiling operations. With four flutes and a right-hand cut and right-hand flute configuration, the 5426100 is suited for conventional machining setups in manual and CNC machine tools. Overall length is 3-1\/4 inches.\u003c\/p\u003e\n\u003cp\u003eThis end mill is used in metalworking shops and tool rooms where cobalt tooling is preferred over carbide for toughness and resistance to chipping. The double-end design provides two usable cutting ends, extending tool life and reducing per-cut cost in production and job-shop environments. Typical applications include finishing passes, light slotting, and profile milling on steel, stainless, and high-temperature alloys. It is installed in milling machines, machining centers, and CNC routers by machinists and toolroom technicians. The non-center-cutting geometry means it is not suited for plunge drilling operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction provides heat resistance for machining hardened and stainless steels\u003c\/li\u003e\n  \u003cli\u003eDouble-end design delivers two cutting ends per tool for extended service life\u003c\/li\u003e\n  \u003cli\u003e4-flute, 30-degree helix spiral flute geometry supports efficient chip flow in side milling and slotting\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute configuration for standard spindle rotation setups\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for use with cutting fluid in ferrous applications\u003c\/li\u003e\n  \u003cli\u003eRegular length classification with 3\/8-inch shank for broad collet and end mill holder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-application end mill fitting standard 3\/8-inch collets, end mill holders, and shrink-fit holders used in vertical milling machines and CNC machining centers. Part of the OSG Series 542 cobalt double-end end mill family.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the machine spindle is fully stopped and locked out before changing tooling. Secure the shank to the minimum recommended engagement depth in the holder and verify runout before beginning a cut. Do not use this tool for plunge operations, as the 5426100 is non-center-cutting.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 11\/64 inch (0.1719 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 High-Speed Steel)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 542\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5426100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51729677058354,"sku":"5426100","price":71.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8cff4ea7cb55b61fa30b0d555430ac44.jpg?v=1788707636","url":"https:\/\/voomisupply.com\/products\/osg-5426100-square-end-mill-11-64-in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}