{"product_id":"osg-4550308-square-end-mill-1-2-in-4-flute-cobalt-ticn","title":"Osg 4550308 Square End Mill 1\/2 in 4-flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 4550308 is a square end mill designed for milling operations in ferrous and non-ferrous metals where a flat-bottomed cut is required. It features a 0.5-inch cutting diameter, a 2-inch length of cut, and a 0.5-inch shank diameter, with an overall length of 4 inches. The tool is manufactured from cobalt high-speed steel and carries a TiCN (titanium carbonitride) coating, which increases surface hardness and wear resistance compared to uncoated tooling. A 30-degree helix angle promotes chip evacuation and reduces cutting forces during slotting and peripheral milling operations.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for machining shops, tool rooms, and production environments requiring reliable performance in alloy steels, stainless steels, and similar difficult-to-machine materials. The long-series geometry makes it appropriate for applications where additional reach is needed beyond standard-length tooling. It is a single-end tool with a right-hand cut and right-hand flute configuration, falling within the OSG Series 455 product line. Fine-pitch flute spacing is specified for this tool.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt HSS construction for improved heat and wear resistance over standard M2 HSS\u003c\/li\u003e\n  \u003cli\u003eTiCN coating adds surface hardness and extends tool life in abrasive and ferrous materials\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip evacuation during slotting and profiling\u003c\/li\u003e\n  \u003cli\u003e4-flute, fine-pitch configuration balances feed rate capability with surface finish quality\u003c\/li\u003e\n  \u003cli\u003eLong-series length of cut at 2 inches suits deeper pockets and extended-reach applications\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute geometry compatible with standard CNC and manual milling spindles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for 0.5-inch straight-shank collet chucks, end mill holders, and milling arbors used on vertical and horizontal milling machines and machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the spindle is fully stopped and locked out before inserting or removing the tool from the holder. Verify that the shank is clean and fully seated in the collet or end mill holder to the recommended engagement depth before tightening. Inspect the cutting edges for chips or wear before each use, and do not exceed the manufacturer's recommended speeds and feeds for the workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Pitch\u003c\/strong\u003e: Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 455\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4550308\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51741341516082,"sku":"4550308","price":184.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/52b5327df2babae384131a1d0f7ef1c7.jpg?v=1788830888","url":"https:\/\/voomisupply.com\/products\/osg-4550308-square-end-mill-1-2-in-4-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}