{"product_id":"osg-36700411-corner-radius-end-mill-0-1094-in-4-flute","title":"Osg 36700411 Corner Radius End Mill 0.1094 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 36700411 is a solid carbide corner radius end mill designed for precision milling in demanding metalworking applications. It features a 0.1094-inch mill diameter, a 0.01-inch corner radius, and four right-hand helical flutes with a 30-degree helix angle. The cutting edges are finished with OSG WXL PVD coating, which improves wear resistance and tool life across a wide range of workpiece materials. With an overall length of 1.5 inches and a 3\/8-inch length of cut, this single-end, centercutting tool handles both roughing and finishing passes. It fits standard toolholders via a 1\/8-inch straight cylindrical shank. A licensed machinist or toolroom professional typically selects this tool for close-tolerance work on steel, stainless steel, cast iron, and similar materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers and manual mills where a small-diameter corner radius tool is required to blend walls and floors cleanly without a sharp 90-degree corner. The centercutting geometry allows plunge entry as well as conventional peripheral and slot milling. Its micrograin carbide substrate and WXL coating make it appropriate for steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. The regular-length flute configuration and straight shank make it a direct fit for collet-style and hydraulic toolholders in Series 3670 tooling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.01-inch corner radius blends wall-to-floor transitions and reduces stress concentrations in machined pockets\u003c\/li\u003e\n  \u003cli\u003eWXL PVD coating provides elevated wear resistance for steel, stainless steel, superalloys, and hard materials\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate delivers rigidity and edge retention in small-diameter applications\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits plunge milling without a pre-drilled entry hole\u003c\/li\u003e\n  \u003cli\u003eFour right-hand helical flutes at 30 degrees balance chip evacuation with cutting stability\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of 0.0000 to -0.0008 inches supports close-tolerance feature work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard collet, hydraulic, or shrink-fit toolholders accepting a 1\/8-inch straight cylindrical shank. Part of the OSG Series 3670 corner radius end mill family.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Ensure the toolholder bore and collet are clean and within specified runout tolerances before seating the shank, as runout beyond recommended limits accelerates edge wear on small-diameter tools. Confirm spindle speed and feed rate parameters are appropriate for the workpiece material and depth of cut before engaging the cutter. Inspect the cutting edges for chipping before each use and replace the tool if edge condition is compromised.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1094 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.01 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: WXL (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0000 to -0.0008 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3670\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36700411\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51728583229746,"sku":"36700411","price":58.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/61fd444d923193a82d22b96ab9df5fa2.jpg?v=1788693618","url":"https:\/\/voomisupply.com\/products\/osg-36700411-corner-radius-end-mill-0-1094-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}