{"product_id":"osg-36700311-corner-radius-end-mill-0-0938-in-4-flute","title":"Osg 36700311 Corner Radius End Mill 0.0938 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 36700311 is a solid carbide corner radius end mill designed for precision milling in demanding machining environments. With a 0.0938-inch cutting diameter, a 0.01-inch corner radius, and four right-hand helical flutes at a 30-degree helix angle, it delivers both roughing and finishing capability in a single tool. The WXL physical vapor deposition (PVD) coating provides enhanced wear resistance and heat dissipation at the cutting edge. The single-end, centercutting geometry allows plunge entry as well as side milling operations. This tool is intended for use by machinists and CNC operators working in job shops, production facilities, and toolrooms.\u003c\/p\u003e\n\u003cp\u003eThe OSG 36700311 is suited for machining steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. Its 0.625-inch length of cut and 1.5-inch overall length make it appropriate for shallow-to-moderate depth milling passes in tight workpiece features. The straight cylindrical shank accepts standard toolholders with a 0.125-inch bore. The micrograin carbide substrate and WXL coating make this end mill well matched to high-speed applications where tool life and surface finish consistency matter. It is a Series 3670 tool from OSG.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.01-inch corner radius reduces stress concentration at workpiece edges and extends tool life\u003c\/li\u003e\n  \u003cli\u003eWXL PVD coating improves wear resistance across a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for rigidity and edge sharpness retention\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute with normal pitch and medium helix for chip evacuation balance\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard straight-bore toolholders, no special adapter required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-bore cylindrical toolholders accepting a 0.125-inch shank diameter. Suitable for milling steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials per OSG Series 3670 material application guidelines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or turret is in a safe position before inserting or removing the tool. Secure the 0.125-inch shank in a clean, burr-free toolholder bore and torque the retention mechanism to the toolholder manufacturer's specification. Verify runout with a dial indicator before cutting, as excessive runout will accelerate edge wear on small-diameter carbide tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0938 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0100 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches (3\/8 inches nominal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: WXL (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0000 to -0.0008 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3670\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36700311\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51734700425522,"sku":"36700311","price":58.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c1688b4c9c1bc338005b2fbb1d951abd.jpg?v=1788765258","url":"https:\/\/voomisupply.com\/products\/osg-36700311-corner-radius-end-mill-0-0938-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}