{"product_id":"osg-3133012-square-end-mill-0-0787-in-2-flute-solid-carbide","title":"Osg 3133012 Square End Mill 0.0787 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe OSG 3133012 is a solid carbide square end mill designed for precision material removal in milling applications. It features a 0.0787-inch cutting diameter, a 0.1181-inch length of cut, and a 0.1575-inch shank diameter. Built from micrograin solid carbide and finished with OSG WXL coating, this end mill delivers consistent edge retention and wear resistance at small diameters. The 30-degree helix angle and right-hand cut geometry support efficient chip evacuation in ferrous and non-ferrous materials. With a center-cutting design and extended reach configuration, it handles both plunge and side-milling operations in tight-tolerance work. Machinists and tool-and-die professionals are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for precision slot milling, contouring, and profiling in CNC machining centers and manual milling machines. The small 0.0787-inch diameter makes it well-suited for fine-detail work, micro-machining, and die-cavity finishing where larger tools cannot reach. The extended reach configuration, with a 0.4724-inch reach length and 1.7717-inch overall length, allows work in deeper pockets without tool-holder interference. It is commonly used in mold-making, aerospace component machining, and precision part fabrication.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0787-inch (2 mm) cutting diameter for fine-detail and micro-machining applications\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for hardness and edge retention\u003c\/li\u003e\n\u003cli\u003eWXL coating for improved wear resistance and reduced friction\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge entry\u003c\/li\u003e\n\u003cli\u003eExtended reach design with 0.4724-inch reach length for deep-pocket access\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank square end mill compatible with collet chucks and end mill holders accepting a 0.1575-inch (4 mm) shank diameter on CNC and manual milling equipment.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following standard tool-change procedures. Ensure the spindle is fully stopped and the machine is in a safe state before changing tooling. Secure the shank to the full recommended grip depth in the tool holder to minimize runout and prevent pullout under cutting loads. Verify spindle speed and feed rate settings are appropriate for the workpiece material and tool diameter before initiating a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0787 inches (2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1181 inches (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1575 inches (4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.7717 inches (45 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.4724 inches (12 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: WXL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.05 x 0.45 x 0.45 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3133012\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51755667063090,"sku":"3133012","price":91.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e84b450cb5970e1f4551424ecf14ea9c_986d2448-98d4-488a-845d-58304a2c9d02.jpg?v=1788957823","url":"https:\/\/voomisupply.com\/products\/osg-3133012-square-end-mill-0-0787-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}