{"product_id":"osg-3106400-ball-end-mill-0-1575-in-2-flute-solid-carbide","title":"Osg 3106400 Ball End Mill 0.1575 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSG 3106400 is a solid carbide ball end mill designed for demanding milling operations across a broad range of workpiece materials. Part of OSG's Series 3710 ExocarbWXL line, it features a 4.00 mm (0.1575 inches) mill diameter with a 6.00 mm length of cut and a 70.00 mm overall length. The proprietary WXL PVD coating is engineered for rigidity and thermal resistance, making this tool effective for both roughing and finishing passes. The 2-flute, right-hand helical geometry with a 30-degree helix angle promotes efficient chip evacuation in tight pockets and contoured surfaces. Machinists and tooling specialists in metalworking shops are the primary users of this end mill.\u003c\/p\u003e\n\u003cp\u003eThis end mill is rated for primary use in steel, stainless steel, cast iron, and hard materials (ISO material codes P, M, K, H). It also performs in secondary applications involving non-ferrous metals and superalloys including titanium (ISO codes N, S). The single-end, straight-cylindrical shank with a 6.00 mm diameter and h6 shank tolerance fits standard collet and end mill holder setups. The ultra fine micrograin carbide substrate supports hard milling scenarios where edge stability and wear resistance are critical. Standard length configuration makes it suitable for general-purpose vertical and horizontal machining center work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWXL PVD coating provides enhanced wear resistance for hard milling and extended tool life across varied materials\u003c\/li\u003e\n  \u003cli\u003eUltra fine micrograin solid carbide substrate delivers edge rigidity and dimensional stability under high cutting loads\u003c\/li\u003e\n  \u003cli\u003e30-degree medium helix angle with 2-flute helical geometry supports efficient chip flow in both roughing and finishing cuts\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction with h6 shank tolerance for precise, repeatable tool holding\u003c\/li\u003e\n  \u003cli\u003eRated for steel, stainless steel, cast iron, hard materials, non-ferrous metals, and superalloys including titanium\u003c\/li\u003e\n  \u003cli\u003eSingle-end design with 2.00 mm nose radius for accurate ball-end profiling and 3D contouring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard collet chucks and end mill holders accepting a 6.00 mm straight-cylindrical shank with h6 tolerance, as used on vertical and horizontal machining centers in general metalworking and die-mold applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's tooling setup procedures. Ensure the spindle is fully stopped and the machine is in a safe state before inserting or removing the end mill. Use a calibrated torque wrench and the correct collet size to secure the shank without over-clamping, which can distort the h6 shank tolerance. Inspect the cutting edges and coating for damage before each use, and discard the tool if chipping or excessive wear is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1575 inches (4.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.2362 inches (6.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 70.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.005 \/ -0.005 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 2.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Medium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Ultra Fine Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: WXL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Non-Ferrous Metal, Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3710\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3106400\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51746466431282,"sku":"3106400","price":91.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/820c762448a7666da225595635b9bf10.jpg?v=1788870559","url":"https:\/\/voomisupply.com\/products\/osg-3106400-ball-end-mill-0-1575-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}