{"product_id":"osg-1111100-straight-flute-tap-5-16-24-unf-bottoming-hss","title":"Osg 1111100 Straight Flute Tap 5\/16-24 Unf Bottoming Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe OSG 1111100 is a straight flute bottoming tap designed for threading 5\/16-24 UNF holes in a wide range of ferrous and non-ferrous metals. Built from high-speed steel with a bright, uncoated finish, it features 4 flutes and a bottoming chamfer, allowing threads to be cut close to the bottom of a blind hole. The overall length is 2-23\/32 inches with a thread length of 1-21\/32 inches. Right-hand thread direction and an H2 thread limit provide controlled fit and consistent tolerance across production runs. This tap is suited for machine tapping and hand tapping operations in both job-shop and production environments.\u003c\/p\u003e\u003cp\u003eThis tap is rated for use in aluminum, cast aluminum, cast iron, high-carbon steel, low-carbon steel, and medium-carbon steel. The straight flute design makes it effective in materials that produce short, brittle chips, where chip evacuation back through the flute is manageable. It is a practical choice for general-purpose threading tasks in machining, maintenance, and fabrication applications where a bottoming chamfer is required to thread near the bottom of a blind hole.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBottoming chamfer allows threading to the bottom of blind holes\u003c\/li\u003e\n\u003cli\u003e4 straight flutes suited for short-chip materials including cast iron and aluminum\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction for durability across a broad range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eH2 thread limit for consistent tolerance control on UNF threads\u003c\/li\u003e\n\u003cli\u003eRight-hand thread direction, standard for most UNF applications\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish  -  no coating buildup to affect thread tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for 5\/16-24 UNF threading applications in aluminum, cast aluminum, cast iron, high-carbon steel, low-carbon steel, and medium-carbon steel workpieces. Part of OSG Series 101.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tap should be installed and used by machinists or maintenance professionals familiar with tapping operations. Always secure the workpiece and use a properly aligned tap holder or tapping head to avoid tap breakage. Ensure the pilot hole is drilled to the correct tap drill size for 5\/16-24 UNF before threading. Apply appropriate cutting fluid for the workpiece material to reduce wear and improve thread quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 5\/16-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Type\u003c\/strong\u003e: Bottoming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Limit\u003c\/strong\u003e: H2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-23\/32 inches (2.7205 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 1-21\/32 inches (0.8346 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.318 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Length\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Size\u003c\/strong\u003e: 0.238 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 1.3228 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum, Cast Aluminum, Cast Iron, High-Carbon Steel, Low-Carbon Steel, Medium-Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1111100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSG","offers":[{"title":"Default Title","offer_id":51740529623346,"sku":"1111100","price":24.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bcc36b715d9d0a2f24ece8e896a2216e.jpg?v=1788825721","url":"https:\/\/voomisupply.com\/products\/osg-1111100-straight-flute-tap-5-16-24-unf-bottoming-hss","provider":"Voomi Supply","version":"1.0","type":"link"}