{"product_id":"osborn-0007500800-drive-arbor-1-4-in-wheel-brush","title":"Osborn 0007500800 Drive Arbor 1\/4 in Wheel Brush","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSBORN 0007500800 is a drive arbor designed to mount small-diameter wheel brushes to rotary tools and die grinders. It converts a 1\/4 inch arbor hole to a 1\/4 inch shank, allowing standard wheel brushes to be chucked into tools with a 1\/4 inch collet or chuck. The arbor does not include an attached spindle and is not a flow-through design. It is a compact, direct-drive adapter suited for deburring, surface prep, and finishing applications where small wheel brushes are the working tool. Installation and removal are straightforward for any metalworking or maintenance tech working with bench grinders, die grinders, or flexible-shaft machines.\u003c\/p\u003e\n\u003cp\u003eThis drive arbor is intended for use with small-diameter wheel brushes in light industrial, maintenance, and fabrication settings. Typical applications include weld cleanup, rust removal, edge deburring, and surface conditioning on metal workpieces. The 1\/4 inch shank fits the collet size common to most die grinders and rotary tools used in HVAC, plumbing, and general metalworking trades. The 0.375 inch bolt hole diameter accommodates standard wheel brush mounting hardware.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts 1\/4 inch arbor hole wheel brushes to 1\/4 inch shank drive\u003c\/li\u003e\n  \u003cli\u003e0.375 inch bolt hole diameter for standard wheel brush hardware\u003c\/li\u003e\n  \u003cli\u003eNo attached spindle — clean, low-profile arbor design\u003c\/li\u003e\n  \u003cli\u003eNon-flow-through construction suitable for solid-arbor wheel brush mounting\u003c\/li\u003e\n  \u003cli\u003eCompatible with die grinders and rotary tools accepting 1\/4 inch shank tooling\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.13 pounds for minimal tool balance disruption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-drive adapter for small-diameter wheel brushes with a 1\/4 inch arbor hole, intended for use with rotary tools and die grinders equipped with a 1\/4 inch collet or chuck.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by threading or pressing the wheel brush onto the arbor and securing it per the brush manufacturer's hardware specifications, then inserting the 1\/4 inch shank into the tool collet and tightening firmly. Always confirm the tool is unplugged or the air supply is disconnected before mounting or removing any abrasive accessory. Verify that the wheel brush speed rating meets or exceeds the tool's maximum RPM before operation. Follow applicable ANSI and OSHA abrasive wheel safety guidelines when mounting and running wheel brush assemblies.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Connection Type\u003c\/strong\u003e: Drive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrush Compatibility\u003c\/strong\u003e: Wheel Brush\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt Hole Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAttached Spindle\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow-through Spindle\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112811\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSBORN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 0007500800\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSBORN","offers":[{"title":"Default Title","offer_id":51733105049906,"sku":"0007500800","price":19.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7f4a3688f3885c25f30291eec454710d.jpg?v=1788751414","url":"https:\/\/voomisupply.com\/products\/osborn-0007500800-drive-arbor-1-4-in-wheel-brush","provider":"Voomi Supply","version":"1.0","type":"link"}