{"product_id":"osborn-0002649500-knotted-wire-wheel-brush-4-inch","title":"Osborn 0002649500 Knotted Wire Wheel Brush 4 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe OSBORN 0002649500 is a knotted wire wheel brush designed for aggressive surface preparation and weld cleaning on metal workpieces. Built with stringer bead twist wire knots and a threaded arbor hole mount, this brush attaches directly to angle grinders and bench grinders for high-torque applications. The fill material is steel wire with a filament diameter in the 0.0200 to 0.0299 inch range, giving it the stiffness needed to cut through rust, mill scale, weld slag, and heavy oxidation. Rated to 12,000 RPM, it suits demanding production and fabrication environments where a standard crimped brush would deflect or wear too quickly.\u003c\/p\u003e\n\u003cp\u003eThis wheel brush is used in metal fabrication shops, pipe welding, structural steel work, and general industrial maintenance. It is suited for operators using 5\/8-11 threaded spindle grinders, which is the standard arbor thread on most large-diameter angle grinders. Typical applications include pre-weld surface cleaning, post-weld slag removal, paint and coating stripping, and deburring on steel and ferrous metals. The 1 inch trim length and 3\/16 inch face width concentrate wire contact for focused, controlled material removal rather than broad blending.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eStringer bead twist knot construction delivers higher wire density and cutting aggression than crimped wire designs\u003c\/li\u003e\n  \u003cli\u003e5\/8-11 threaded arbor hole mounts directly to standard large-bore angle grinders without an adapter\u003c\/li\u003e\n  \u003cli\u003e12,000 RPM maximum speed rating suits high-power grinders used in fabrication and maintenance\u003c\/li\u003e\n  \u003cli\u003eSteel fill wire with 0.0200 to 0.0299 inch filament diameter provides rigidity for heavy-scale and slag removal\u003c\/li\u003e\n  \u003cli\u003e3\/16 inch face width and 1 inch trim length focus wire contact for precise weld seam cleaning\u003c\/li\u003e\n  \u003cli\u003eThreaded arbor hole style with no shank included — mounts to spindle grinders, not die grinders or drills\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with angle grinders or bench grinders equipped with a 5\/8-11 threaded spindle arbor. Intended for steel and ferrous metal surface preparation. No additional compatible model numbers were specified in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by qualified personnel familiar with abrasive wheel safety. Always verify the grinder spindle speed does not exceed the 12,000 RPM brush rating before mounting. Wear appropriate PPE including face shield, gloves, and hearing protection during use. Inspect the brush for damaged or broken wire filaments before each use and remove from service if any are found.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Thread Size\u003c\/strong\u003e: 5\/8-11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Style\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Stringer Bead\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Knot Type\u003c\/strong\u003e: Stringer Bead Twist\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament Wire Diameter Range\u003c\/strong\u003e: 0.0200 to 0.0299 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 12,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEncapsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.875 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: OSBORN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 0002649500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OSBORN","offers":[{"title":"Default Title","offer_id":51750997524786,"sku":"0002649500","price":37.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5894e789835eeaa948144e67bbc7f382.jpg?v=1788921050","url":"https:\/\/voomisupply.com\/products\/osborn-0002649500-knotted-wire-wheel-brush-4-inch","provider":"Voomi Supply","version":"1.0","type":"link"}