{"product_id":"onsrud-62-718-downcut-spiral-router-bit-3-16-in-solid-carbide","title":"Onsrud 62-718 Downcut Spiral Router Bit 3\/16 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ONSRUD 62-718 is a single-edge downcut spiral router bit engineered for precision cutting in hard plastics and engineered materials. Manufactured from solid carbide, it delivers clean top-surface finishes by directing chips downward during the cut, which reduces lifting and delamination on the workpiece face. The cutter diameter is 0.1875 inches (3\/16 inch) with a 0.625-inch length of cut, a 2-inch overall length, and a 1\/4-inch shank diameter. A 21-degree helix angle and right-hand cutting direction are optimized for controlled, accurate passes in CNC router applications. This bit ships uncoated and is suited for production shops and fabrication professionals running automated routing equipment.\u003c\/p\u003e\u003cp\u003eThis bit is designed for CNC routing of hard materials including acrylic, nylon, PVC, polycarbonate, and solid surfaces. It fits standard 1\/4-inch collet CNC routers used in fabrication, signage, and countertop shops. The downcut geometry is particularly effective when the top face of the workpiece must remain chip-free and tear-free, such as when routing finished acrylic panels or laminated sheet goods. It is part of the ONSRUD 62-700 series, which targets plastic and hard composite materials in production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDowncut flute geometry directs chips downward to protect the top workpiece surface\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides hardness and wear resistance for extended production use\u003c\/li\u003e\n\u003cli\u003eSingle-edge design allows controlled chip evacuation in hard plastic materials\u003c\/li\u003e\n\u003cli\u003e21-degree helix angle optimized for acrylic, PVC, polycarbonate, nylon, and solid surfaces\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction compatible with standard CNC router spindles\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for plastics where coating adhesion or contamination is a concern\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with CNC routers equipped with a 1\/4-inch collet. Rated for hard material applications including acrylic, nylon, PVC, polycarbonate, and solid surfaces as specified by the manufacturer. Part of the ONSRUD 62-700 series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by a qualified CNC operator or machinist with the spindle fully powered down and locked out. Seat the 1\/4-inch shank fully into the collet and tighten to the router manufacturer's specified torque range for the collet size. Inspect the cutting edges for chips or wear before each production run. Follow all applicable machine guarding and personal protective equipment requirements for CNC routing operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches (1\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.375 inches (1-3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 21 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Downcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouter Style\u003c\/strong\u003e: Single Edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBit Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Hard Material (Acrylic, Nylon, PVC, Polycarbonate, Solid Surfaces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 62-700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ONSRUD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 62-718\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONSRUD","offers":[{"title":"Default Title","offer_id":67907554246962,"sku":"62-718","price":76.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/91a90a3f249b6d4bf75466465b9656c5_4c0f9f57-2e57-4418-b104-cbf6f4eb8cf1.jpg?v=1791180402","url":"https:\/\/voomisupply.com\/products\/onsrud-62-718-downcut-spiral-router-bit-3-16-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}