{"product_id":"onsrud-60-124mw-compression-spiral-router-bit-3-8-in","title":"Onsrud 60-124MW Compression Spiral Router Bit 3\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ONSRUD 60-124MW is a solid carbide compression spiral router bit designed for clean, chip-free cuts in double sided laminated and veneered panel materials. The compression flute geometry combines an upcut base spiral with a downcut top spiral, applying opposing forces to the workpiece face and back simultaneously. This action suppresses tearout and delamination on both surfaces in a single pass. With a 0.375 inch cutter diameter, a 1.125 inch length of cut, and a 30-degree helix angle, this bit suits high-feed routing applications where surface quality on both faces is critical. Woodworking shops, cabinet fabricators, and millwork operations are the primary users.\u003c\/p\u003e\n\u003cp\u003eThis bit is built for routing double sided laminated sheet goods, melamine, HPL-faced panels, and veneered substrates where both the top and bottom face must remain clean and unmarred. It fits standard 3\/8 inch collets on CNC routers and handheld router platforms. The 1.875 inch shank length provides adequate engagement for secure collet clamping. The double edge cutting style and right-hand cutting direction are consistent with conventional CNC router spindle rotation. Applications include panel sizing, cabinet component cutting, and millwork profiling on composite and laminated wood-based sheet materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompression flute geometry suppresses tearout on both faces of laminated and veneered panels\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction delivers edge retention and heat resistance under sustained feed rates\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip evacuation during routing passes\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard CNC router spindle rotation\u003c\/li\u003e\n  \u003cli\u003eUncoated finish  -  suitable for use as-ground without additional surface treatment\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch shank fits standard collet sizes on benchtop and CNC router platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003ePart of the ONSRUD 60-100MW series. Designed for use with double sided laminated and veneered materials in CNC and handheld router applications requiring a 3\/8 inch collet.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified operator following the router or CNC machine manufacturer's tooling guidelines. Shut down and lock out the spindle before changing bits. Seat the shank fully into the collet to the recommended insertion depth and torque the collet nut per the machine manufacturer's specification. Inspect the bit for chipping or wear before each use and do not operate a damaged bit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Compression\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRouter Style\u003c\/strong\u003e: Double Edge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBit Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Double Sided Laminated and Veneered Materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePiloted\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 60-100MW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ONSRUD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 60-124MW\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONSRUD","offers":[{"title":"Default Title","offer_id":67910692766002,"sku":"60-124MW","price":188.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b8a3044f571dd9f68b9b442842f16a23.jpg?v=1791199709","url":"https:\/\/voomisupply.com\/products\/onsrud-60-124mw-compression-spiral-router-bit-3-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}