{"product_id":"onsrud-56-082l-square-end-router-bit-1-4-inch-solid-carbide","title":"Onsrud 56-082L Square End Router Bit 1\/4 Inch Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ONSRUD 56-082L is a 2-flute, square end, double edge router bit designed for cutting hard materials in industrial and production routing applications. Built from solid carbide, this bit delivers durability and edge retention in demanding applications. It features a 1\/4 inch cutter diameter, 3\/4 inch length of cut, and a 2.5 inch overall length. The left-hand cutting direction suits specific climb-cutting setups and specialized CNC or handheld routing configurations. Installed by machinists, fabricators, and CNC operators, it performs reliably across a wide range of non-metallic materials.\u003c\/p\u003e\u003cp\u003eThis router bit is suited for use on plastics, composites, and solid surface materials including ABS, acetal, acrylic, fiberglass, foam, nylon, polyvinylchloride, phenolic, and solid surfaces. Its double edge router style makes it effective in production environments where consistent, repeatable cuts are required. The 1\/4 inch shank diameter fits standard collets used in both handheld routers and CNC spindles operating at appropriate speeds for carbide tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eLeft-hand cutting direction for climb-cut or reverse-rotation applications\u003c\/li\u003e\n\u003cli\u003eSquare end geometry delivers clean, flat-bottomed cuts\u003c\/li\u003e\n\u003cli\u003eDouble edge router style for efficient material removal\u003c\/li\u003e\n\u003cli\u003e2-flute straight flute design reduces chip buildup during cutting\u003c\/li\u003e\n\u003cli\u003eNo pilot bearing  -  used for freehand and guided fixture routing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with routing applications involving ABS, acetal, acrylic, fiberglass, foam, nylon, polyvinylchloride, phenolic, and solid surfaces. Part of the ONSRUD 56-000P series. Fits standard 1\/4 inch collets.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit should be installed by a qualified machinist or CNC operator familiar with carbide tooling requirements. Ensure the router or spindle is fully powered down and locked out before installing or removing the bit. Verify collet condition and torque the collet nut to the tool manufacturer specifications before operation. Left-hand cut bits require confirmation of spindle rotation direction before use to prevent improper engagement and tool damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouter Style\u003c\/strong\u003e: Double Edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBit Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiloted\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 56-000P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: ABS, Acetal, Acrylic, Fiberglass, Foam, Nylon, Polyvinylchloride, Phenolic, Solid Surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ONSRUD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 56-082L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONSRUD","offers":[{"title":"Default Title","offer_id":67912100380978,"sku":"56-082L","price":79.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1a8ba158201c7bb65d83ce5dd8c7bd33.jpg?v=1791227146","url":"https:\/\/voomisupply.com\/products\/onsrud-56-082l-square-end-router-bit-1-4-inch-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}