{"product_id":"onsrud-52-300-upcut-spiral-router-bit-5-16-in-solid-carbide","title":"Onsrud 52-300 Upcut Spiral Router Bit 5\/16 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ONSRUD 52-300 is a solid carbide upcut spiral router bit designed for high-quality milling and routing operations in woodworking, plastic fabrication, and composite panel work. With a 5\/16-inch (0.3125 inches) cutter diameter and a 1.125-inch length of cut, this double-edge bit produces clean through-cuts while evacuating chips upward and away from the workpiece. The 30-degree helix angle promotes smooth cutting action and reduces heat buildup in the cut zone. At 3 inches overall length and 0.1 pounds, it fits standard CNC routers and handheld router setups running right-hand rotation. The uncoated solid carbide construction delivers consistent edge retention across a range of non-ferrous materials.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for residential and light commercial fabrication environments where operators are cutting natural wood, plastics, solid surfaces, and wood composites. Typical applications include cabinet component profiling, sign-making, plastic sheet routing, and MDF panel work. The upcut flute geometry pulls material upward, making it a common choice for through-cuts on CNC routers where chip clearance at the table surface is a priority. The 1.875-inch shank length provides solid tool holding engagement in standard collet setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for durability and edge retention in wood, plastics, and composites\u003c\/li\u003e\n  \u003cli\u003eUpcut flute geometry evacuates chips upward, keeping the cut zone clear\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting and reduces heat in the kerf\u003c\/li\u003e\n  \u003cli\u003eDouble-edge (two-flute) design balances chip load across the cut\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard CNC and handheld router spindles\u003c\/li\u003e\n  \u003cli\u003eUncoated finish  -  no coating buildup concerns when routing plastics or resins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in natural wood, plastics, solid surfaces, and wood composites. Compatible with routers accepting a 5\/16-inch shank collet. Part of the ONSRUD 52-200 series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified CNC operator or machinist familiar with router tooling and collet systems. Ensure the router spindle is fully powered down and locked out before changing tooling. Insert the shank to the full recommended engagement depth in the collet  -  do not extend the bit beyond the length of cut zone into the collet bore. Verify spindle RPM is set to the material-appropriate range per the tool manufacturer feed-and-speed charts before initiating a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.3125 inches (5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.125 inches (1-1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3125 inches (5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.875 inches (1-7\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRouter Style\u003c\/strong\u003e: Double Edge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBit Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Natural Wood, Plastics, Solid Surfaces, Wood Composites\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 52-200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ONSRUD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 52-300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONSRUD","offers":[{"title":"Default Title","offer_id":67910083674418,"sku":"52-300","price":112.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a6d301920de13c4bb3e1074abac47e5b_d343a40e-7c1b-471e-ab0f-53d803e72fd1.jpg?v=1791195662","url":"https:\/\/voomisupply.com\/products\/onsrud-52-300-upcut-spiral-router-bit-5-16-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}