{"product_id":"nvent-a303012lp-continuous-hinge-enclosure-nema-12-13","title":"Nvent A303012LP Continuous Hinge Enclosure Nema 12\/13","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe NVENT A303012LP is a single-door, continuous hinge steel enclosure designed for industrial electrical and control panel applications. Built from 14-gauge mild steel, it measures 30 inches high by 30 inches wide by 12 inches deep. The interior is finished white and the exterior is ANSI 61 gray, with the door finished ANSI 61 gray on both sides. A heavy-gauge continuous hinge with removable pin provides full-length door support. Two clamps and a gasketed, padlockable hasp and staple keep the door sealed against dust, oil, and moisture. Licensed electricians and panel builders typically specify this enclosure for mounting industrial control components in demanding environments.\u003c\/p\u003e\u003cp\u003eThe A303012LP is suited for wall-mounted industrial control applications in manufacturing, process, and utility environments where NEMA 12\/13 and IP65 protection is required. It is appropriate for both indoor and splash-resistant outdoor installations where dust and non-corrosive liquids are present. External wall mounting brackets are included for direct installation onto structural surfaces. Back panels A30P30 and A30P30G are compatible with this enclosure for mounting DIN rails, terminal blocks, and other control components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e14-gauge mild steel construction with seams continuously welded and ground smooth\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge continuous hinge with removable pin for full-door access and easy removal\u003c\/li\u003e\n\u003cli\u003eOil-resistant gasket and 2-clamp closure system rated NEMA 12\/13 and IP65\u003c\/li\u003e\n\u003cli\u003ePadlockable hasp and staple for security in controlled access areas\u003c\/li\u003e\n\u003cli\u003eExternal wall mounting brackets included; formed external return flanges around all sides of enclosure opening\u003c\/li\u003e\n\u003cli\u003eHigh-impact thermoplastic large data pocket and bonding provision on door\u003c\/li\u003e\n\u003cli\u003eRoHS compliant; manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible back panels A30P30 and A30P30G are designed for use with this enclosure. Approved for use in panels built to UL 508A, CUL, and CSA C22.2 standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified electrician in accordance with the NEC and any applicable local codes. De-energize all circuits before opening or working inside the enclosure. Use the included external mounting brackets to secure the enclosure to a structurally adequate wall surface. Verify gasket seating and clamp engagement after installation to maintain the rated NEMA 12\/13 and IP65 protection level.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: 14 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White inside, ANSI 61 Gray outside (body); ANSI 61 Gray inside and outside (door)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor Type\u003c\/strong\u003e: One door, heavy-gauge continuous hinge with removable pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Clamps\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Rating\u003c\/strong\u003e: NEMA 12\/13, IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Back Panels\u003c\/strong\u003e: A30P30, A30P30G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals\u003c\/strong\u003e: UL 508A, CUL, CSA C22.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicable Standard\u003c\/strong\u003e: IEC 60529\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoHS Compliant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: US\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NVENT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: A303012LP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NVENT","offers":[{"title":"Default Title","offer_id":51284035207474,"sku":"A303012LP","price":1576.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279177.jpg?v=1781066766","url":"https:\/\/voomisupply.com\/products\/nvent-a303012lp-continuous-hinge-enclosure-nema-12-13","provider":"Voomi Supply","version":"1.0","type":"link"}