{"product_id":"norton-66253043009-cutoff-wheel-8in-aluminum-oxide-60-grit","title":"Norton 66253043009 Cutoff Wheel 8in Aluminum Oxide 60 Grit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe NORTON 66253043009 is an aluminum oxide reinforced cutoff wheel designed for aggressive cutting and parting operations on steel. Built to a Type 1 (flat) profile, it measures 8 inches in diameter and 0.06 inches thick, with a 1\/2 inch arbor hole for mounting on compatible stationary grinders. The resinoid bond holds aluminum oxide abrasive grains at a 60-grit rating, delivering a balance of cut rate and surface finish suitable for ferrous metal fabrication work. Both sides of the wheel are reinforced for added structural integrity during high-speed operation. The maximum operating speed is 7,640 RPM. Licensed trades and metal fabricators working with stationary equipment will find this wheel a straightforward fit for production cutting tasks.\u003c\/p\u003e\u003cp\u003eThis cutoff wheel is intended for use with stationary grinders in shop and fabrication environments. It is well suited for cutting steel bar stock, pipe, angle iron, and similar ferrous workpieces. The 8-inch diameter and thin 0.06-inch kerf minimize material loss and heat buildup during straight cuts. At 0.5 pounds, the wheel is light enough for easy handling and spindle balancing during setup.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8-inch diameter Type 1 flat profile for straight parting cuts on stationary grinders\u003c\/li\u003e\n\u003cli\u003eAluminum oxide abrasive with 60-grit rating rated for steel applications\u003c\/li\u003e\n\u003cli\u003eResinoid bond provides durability and consistent grain release during cutting\u003c\/li\u003e\n\u003cli\u003eBoth sides reinforced for structural integrity at operating speeds up to 7,640 RPM\u003c\/li\u003e\n\u003cli\u003eThin 0.06-inch wheel thickness reduces kerf width and heat generation\u003c\/li\u003e\n\u003cli\u003e1\/2 inch arbor hole fits standard stationary grinder spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with stationary grinders accepting an 8-inch diameter, Type 1 cutoff wheel with a 1\/2 inch arbor hole. Rated for steel cutting applications per manufacturer specification A60-OBNA2.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and wheel changes should be performed by qualified personnel following ANSI B7.1 safety standards for abrasive wheels. Always power down and lock out the grinder before mounting or removing the wheel. Inspect the wheel for cracks or damage before each use and never exceed the rated maximum speed of 7,640 RPM. Use the correct flanges and blotter paper as required by the grinder manufacturer.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Thickness\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor Hole Size\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond Type\u003c\/strong\u003e: Resinoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Type\u003c\/strong\u003e: Type 1 (01\/41)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 7,640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness Code\u003c\/strong\u003e: O\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced\u003c\/strong\u003e: Yes, both sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Color\u003c\/strong\u003e: Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: A60-OBNA2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23131503\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NORTON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66253043009\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NORTON","offers":[{"title":"Default Title","offer_id":51541374632242,"sku":"66253043009","price":54.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b71d2f81c8b0928b3c685fdcd4d40ad4.jpg?v=1785873994","url":"https:\/\/voomisupply.com\/products\/norton-66253043009-cutoff-wheel-8in-aluminum-oxide-60-grit","provider":"Voomi Supply","version":"1.0","type":"link"}