{"product_id":"norton-66252839110-cup-brush-2in-carbon-steel-crimped","title":"Norton 66252839110 Cup Brush 2in Carbon Steel Crimped","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe NORTON 66252839110 is a crimped carbon steel cup brush designed for surface preparation, deburring, and scale removal on metal workpieces. Measuring 2 inches in diameter with a 0.012-inch wire diameter, this brush mounts via a 1\/4-inch shank and is rated for use up to 13,000 RPM. The crimped fill configuration provides moderate, consistent contact pressure across the work surface, making it well suited for cleaning welds, removing rust, and blending light surface irregularities. It is typically used with angle grinders or drill presses equipped with a compatible chuck or collet.\u003c\/p\u003e\n\u003cp\u003eThis cup brush is appropriate for light-to-medium metalworking tasks in fabrication shops, maintenance facilities, and field service environments. The 1\/4-inch shank allows direct mounting in standard drill chucks and die grinders without additional adapters. The 5\/8-inch trim length gives the filaments enough flex to conform to irregular surfaces while maintaining aggressive cutting action. Typical installers and users include welders, pipefitters, millwrights, and general maintenance technicians.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2-inch brush diameter for focused surface coverage in confined areas\u003c\/li\u003e\n  \u003cli\u003eCrimped carbon steel fill for consistent, flexible wire contact\u003c\/li\u003e\n  \u003cli\u003e0.012-inch wire diameter balances aggressiveness with surface finish\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch shank mounts directly in standard drill chucks and die grinders\u003c\/li\u003e\n  \u003cli\u003e13,000 RPM maximum rating for safe operation at common tool speeds\u003c\/li\u003e\n  \u003cli\u003e5\/8-inch trim length provides controlled filament flex and consistent scratch pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with angle grinders, die grinders, and drill presses accepting a 1\/4-inch shank. Verify that the tool spindle speed does not exceed 13,000 RPM before mounting.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eAlways power down and disconnect the tool from its power source before mounting or removing the brush. Confirm the tool chuck or collet is rated for the shank diameter and that the tool maximum RPM does not exceed the brush rating of 13,000 RPM. Operators should wear appropriate PPE including safety glasses or a face shield and gloves, as wire filaments can shed during use. Follow OSHA and ANSI B11 abrasive tool safety guidelines when operating rotary wire brushes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrush Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.012 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrush Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 13,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.4 inches x 2.25 inches x 5.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NORTON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66252839110\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NORTON","offers":[{"title":"Default Title","offer_id":51540329988402,"sku":"66252839110","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b1001bc1c4d2e67a65ebc76eb34b931d.jpg?v=1785852389","url":"https:\/\/voomisupply.com\/products\/norton-66252839110-cup-brush-2in-carbon-steel-crimped","provider":"Voomi Supply","version":"1.0","type":"link"}