{"product_id":"norton-66243510640-cut-off-wheel-2-5-in-aluminum-oxide","title":"Norton 66243510640 Cut-off Wheel 2.5 in Aluminum Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe NORTON 66243510640 is an aluminum oxide reinforced cut-off wheel designed for aggressive cutting on steel and stainless steel. At 2.5 inches in diameter and 1\/16 inch thick, this Type 1 (01\/41) flat wheel fits standard die grinders and delivers clean, narrow cuts with minimal material loss. The resinoid bond holds abrasive grain firmly under high-speed use, and both sides are reinforced for added structural integrity at speeds up to 30,560 RPM. At 0.1 pounds, it is light enough to keep in a tool pouch without adding noticeable bulk. The Gemini specification line is recognized for consistent grain distribution and predictable wheel performance in trade environments.\u003c\/p\u003e\n\u003cp\u003eThis cut-off wheel is suited for metal fabrication, pipe cutting, weld preparation, and deburring tasks on steel and stainless steel in both residential and commercial service settings. The 0.25 inch arbor hole fits the collets found on most standard pneumatic and electric die grinders. Electricians, pipefitters, plumbers, HVAC technicians, and general mechanical contractors commonly keep this size on hand for tight-clearance cuts where larger angle grinder wheels cannot reach.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum oxide abrasive with resinoid bond for consistent cutting on steel and stainless steel\u003c\/li\u003e\n  \u003cli\u003eType 1 (01\/41) flat wheel profile delivers straight, narrow kerfs\u003c\/li\u003e\n  \u003cli\u003eBoth sides reinforced for structural integrity at rated speed\u003c\/li\u003e\n  \u003cli\u003e30,560 maximum RPM rating for use with standard die grinders\u003c\/li\u003e\n  \u003cli\u003e1\/16 inch thickness minimizes material waste per cut\u003c\/li\u003e\n  \u003cli\u003eGemini specification for controlled grain distribution and wheel consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with die grinders accepting a 0.25 inch arbor hole. Rated for cutting steel and stainless steel applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and wheel changes must be performed by a qualified tradesperson following ANSI B7.1 safety standards for abrasive wheels. Always inspect the wheel for cracks or chips before mounting and never exceed the 30,560 RPM maximum speed rating. Disconnect or de-energize the tool before mounting or removing the wheel. Wear appropriate PPE including eye protection and gloves during installation and operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Diameter\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Thickness\u003c\/strong\u003e: 0.0625 inches (1\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Size\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 30,560\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBond Type\u003c\/strong\u003e: Resinoid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Type\u003c\/strong\u003e: Type 1 (01\/41)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced\u003c\/strong\u003e: Both sides reinforced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Color\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Steel, Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: Gemini\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23131503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NORTON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66243510640\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NORTON","offers":[{"title":"Default Title","offer_id":51539190972722,"sku":"66243510640","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/09d8a0a4c2788e542ef6c7f92dbb09ca.jpg?v=1785836276","url":"https:\/\/voomisupply.com\/products\/norton-66243510640-cut-off-wheel-2-5-in-aluminum-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}