{"product_id":"norton-07660788245-bench-grinding-wheel-6in-aluminum-oxide","title":"Norton 07660788245 Bench Grinding Wheel 6in Aluminum Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe NORTON 07660788245 is a Type 1 bench and pedestal grinding wheel designed for aggressive stock removal on ferrous metals and general-purpose tool sharpening. It measures 6 inches in diameter, 3\/4 inches thick, with a 1-inch arbor hole. The wheel is made from aluminum oxide abrasive bonded with a vitrified bond, producing a rigid, porous-free structure that holds its shape under sustained grinding pressure. Rated at a maximum of 4,140 RPM, it carries a coarse 36\/46 dual-grit specification suited for rapid material removal rather than fine finishing work. A bushing is included to accommodate smaller spindle sizes.\u003c\/p\u003e\u003cp\u003eThis wheel is appropriate for bench grinders and pedestal grinders used in maintenance shops, fabrication facilities, and trade environments. The coarse 36\/46 grit makes it well suited for deburring, rough shaping, and restoring edge geometry on tools such as chisels, drill bits, and lathe tools. It is typically installed by maintenance technicians, machinists, and trade professionals performing routine tool-room grinding tasks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminum oxide abrasive with vitrified bond for rigid, consistent cut\u003c\/li\u003e\n\u003cli\u003eCoarse 36\/46 dual-grit specification for rapid stock removal\u003c\/li\u003e\n\u003cli\u003e6 inches diameter by 3\/4 inches thick Type 1 straight wheel profile\u003c\/li\u003e\n\u003cli\u003e1-inch arbor hole with bushing included to fit common spindle sizes\u003c\/li\u003e\n\u003cli\u003eRated to 4,140 RPM maximum operating speed\u003c\/li\u003e\n\u003cli\u003eNon-porous construction for stable performance under continuous use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard Type 1 replacement wheel for 6-inch bench grinders and pedestal grinders with a 1-inch or reducible arbor; bushing included to fit smaller spindle diameters.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eGrinding wheel installation must be performed with the grinder fully powered down and unplugged. Always perform a ring test by tapping the wheel with a non-metallic mallet before mounting — a clear ring indicates an intact wheel; a dull thud indicates a crack and the wheel must not be used. Ensure the operating speed of the grinder does not exceed the 4,140 RPM maximum rating marked on this wheel. Replace the wheel guard before restoring power, and allow the wheel to run for at least one minute at operating speed with no load before beginning work, following ANSI B7.1 safety requirements.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Thickness\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 36\/46\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond Type\u003c\/strong\u003e: Vitrified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Type\u003c\/strong\u003e: Type 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Color\u003c\/strong\u003e: Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 4,140\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorous\u003c\/strong\u003e: Non-Porous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Included\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.76 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NORTON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 07660788245\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NORTON","offers":[{"title":"Default Title","offer_id":51695040463154,"sku":"07660788245","price":43.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/01fa05797d434743e94a64672168825b.jpg?v=1788330749","url":"https:\/\/voomisupply.com\/products\/norton-07660788245-bench-grinding-wheel-6in-aluminum-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}