{"product_id":"norgren-c24470438-90-swivel-elbow-ptc-fitting-1-4in-od","title":"Norgren C24470438 90 Swivel Elbow Ptc Fitting 1\/4in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe NORGREN C24470438 is a brass push-to-connect 90-degree swivel elbow tube fitting designed for pneumatic and fluid distribution lines. It connects a 1\/4-inch OD tube on each end to a 3\/8-inch male NPTF threaded port, allowing fast, tool-free tube insertion alongside a swiveling threaded connection that simplifies routing in tight spaces. Rated to 150 psi maximum working pressure, it handles operating temperatures from 0 degrees F to 175 degrees F. The nitrile O-ring sealing element provides reliable resistance to common pneumatic system fluids and lubricants. This fitting is installed by HVAC technicians, plumbers, and industrial piping mechanics working with compressed air, water, or compatible fluid lines.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for light industrial, commercial HVAC, and pneumatic control applications where a direction change is needed between a push-to-connect tube run and a male NPT threaded port. The swivel elbow design reduces stress on tubing during installation by allowing the threaded end to rotate independently. Typical install scenarios include pneumatic actuator supply lines, compressed air distribution manifolds, and equipment control panels where 1\/4-inch OD tubing meets NPT-tapped ports or valves rated for the 150 psi working envelope.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-to-connect on both tube ends — no ferrules or compression sleeves required\u003c\/li\u003e\n  \u003cli\u003e90-degree swivel elbow geometry simplifies routing and reduces tubing stress\u003c\/li\u003e\n  \u003cli\u003e3\/8-inch NPTF male thread for leak-resistant tapered-thread port connections\u003c\/li\u003e\n  \u003cli\u003e150 psi maximum working pressure rating\u003c\/li\u003e\n  \u003cli\u003eOperating range of 0 degrees F to 175 degrees F with nitrile O-ring seal\u003c\/li\u003e\n  \u003cli\u003eBrass construction for corrosion resistance in air and water service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 1\/4-inch OD push-to-connect compatible tubing and 3\/8-inch NPTF male threaded ports in pneumatic or fluid distribution systems operating within the rated pressure and temperature range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eShut off and depressurize the system completely before removing or installing any push-to-connect fitting. Ensure the tubing end is cut cleanly and squarely, and that the outer diameter is free of burrs or scoring before inserting into the push-to-connect collet. Apply an appropriate thread sealant or PTFE tape to the NPTF male threads in accordance with the system fluid compatibility and applicable plumbing or mechanical codes. Verify all connections are fully seated and the system is leak-tested before returning to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Tube x MNPT x Tube x Male (Push-To-Connect)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngle\u003c\/strong\u003e: 90 degrees swivel elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: 0 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 175 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.24 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eO-Ring Material\u003c\/strong\u003e: Nitrile\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.062 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NORGREN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C24470438\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NORGREN","offers":[{"title":"Default Title","offer_id":51698846335282,"sku":"C24470438","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ed13f1b57546106a9f581aaa58a48130.jpg?v=1788368805","url":"https:\/\/voomisupply.com\/products\/norgren-c24470438-90-swivel-elbow-ptc-fitting-1-4in-od","provider":"Voomi Supply","version":"1.0","type":"link"}