{"product_id":"noga-ub1105-deburring-blade-holder-7-16-inch-max-hole","title":"Noga UB1105 Deburring Blade Holder 7\/16 Inch Max Hole","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe NOGA UB1105 is a one-piece deburring blade holder designed for front and back hole chamfering on metal workpieces. It accepts Type UB blades and is rated for a maximum hole diameter of 7\/16 inch (0.433 inch decimal, 11.000 mm). The holder is built as a single integrated unit with no separate blade installed at the factory, allowing the technician to fit the appropriate UB-series blade for the application. Machinists, pipefitters, and metal fabricators use this tool during finishing operations to clean burrs left by drilling, punching, or reaming. Its compact overall length of 0.406 inch keeps it maneuverable in tight part geometries.\u003c\/p\u003e\n\u003cp\u003eThe UB1105 is suited for light deburring work on holes ranging from 10.50 mm to 11.000 mm in diameter. It is commonly used in metal fabrication shops, HVAC ductwork manufacturing, electrical panel fabrication, and plumbing rough-in work where drilled holes in sheet metal or pipe brackets require edge cleanup before assembly. The one-piece construction eliminates blade-seat wobble common in multi-piece holders, making it a practical choice for production environments where consistent chamfer quality matters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece construction eliminates assembly slop and maintains consistent blade alignment\u003c\/li\u003e\n  \u003cli\u003eAccepts Type UB blades for front and back deburring in a single pass\u003c\/li\u003e\n  \u003cli\u003eMaximum hole diameter of 7\/16 inch (11.000 mm) with a minimum of 10.50 mm\u003c\/li\u003e\n  \u003cli\u003eCompact overall length of 0.406 inch for use in confined part geometries\u003c\/li\u003e\n  \u003cli\u003eShips as blade holder only  -  order UB-series blades separately to match material type\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.186 pounds for reduced hand fatigue during repetitive deburring tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with Type UB series deburring blades. Fits holes from 10.50 mm to 11.000 mm in diameter. Specific blade compatibility is limited to the Type UB designation  -  do not attempt to seat blades from other series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of the UB-series blade into this holder should be performed with the workpiece secured and the driving tool or handle disconnected from any power source. Wear cut-resistant gloves when handling and seating deburring blades, as edges are sharp before and after use. Verify the blade is fully seated and locked in the holder before beginning any deburring operation. This tool is typically used by machinists and metal fabricators following standard shop-safety protocols for hand and power deburring equipment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Type\u003c\/strong\u003e: Deburring Blade Holder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Compatibility\u003c\/strong\u003e: Type UB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Construction\u003c\/strong\u003e: One-Piece\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Chamfer Type\u003c\/strong\u003e: Front and Back\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Size\u003c\/strong\u003e: Non-blade (blade holder only)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Diameter\u003c\/strong\u003e: 7\/16 inch (0.433 inch \/ 11.000 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 10.50 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.406 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.186 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NOGA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: UB1105\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NOGA","offers":[{"title":"Default Title","offer_id":67912676606258,"sku":"UB1105","price":290.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2e0c7f3bd0bbf13d6a89a2ec3efa3fac_1ff7ab83-2732-4444-8e72-7060945bfe6d.jpg?v=1791237513","url":"https:\/\/voomisupply.com\/products\/noga-ub1105-deburring-blade-holder-7-16-inch-max-hole","provider":"Voomi Supply","version":"1.0","type":"link"}