{"product_id":"nipples-331028209-galvanized-steel-pipe-nipple-1-1-4-in","title":"Nipples 331028209 Galvanized Steel Pipe Nipple 1-1\/4 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe NIPPLES 331028209 is a close-pattern, threaded-both-ends (TBE) galvanized steel pipe nipple sized at 1-1\/4 inches nominal pipe size (NPS) and manufactured to Schedule 40 wall thickness. It carries a Grade B steel classification with welded pipe construction and a hot-dip galvanized finish for corrosion resistance. With a maximum operating pressure of 150 psi at 150 degrees F, this nipple is suited for moderate-pressure systems across a range of media. Plumbers, pipefitters, and HVAC mechanics install this type of fitting when a minimum-length threaded connection is needed between two female-threaded components.\u003c\/p\u003e\n\u003cp\u003eThis pipe nipple is appropriate for use with air, gases, non-potable water, and oil service lines in both residential and light commercial installations. The close pattern means the fitting is fully threaded from end to end with no unthreaded center section, making it ideal for tight-clearance situations where a longer nipple would not fit. It is manufactured in the United States and meets standard Schedule 40 dimensional requirements for 1-1\/4 inch NPS fittings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClose TBE (threaded both ends) pattern for minimum installed length\u003c\/li\u003e\n  \u003cli\u003eGalvanized finish provides corrosion resistance for indoor and moderate-exposure environments\u003c\/li\u003e\n  \u003cli\u003eGrade B steel with welded pipe construction rated to Schedule 40 wall thickness\u003c\/li\u003e\n  \u003cli\u003eRated to 150 psi at 150 degrees F for air, gas, non-potable water, and oil service\u003c\/li\u003e\n  \u003cli\u003e1-1\/4 inch MNPT threads for compatibility with standard female NPT fittings and valves\u003c\/li\u003e\n  \u003cli\u003eMade in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for standard 1-1\/4 inch female NPT threaded piping systems carrying air, gases, non-potable water, or oils at Schedule 40 pressure ratings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers or pipefitters following applicable IPC or IFGC requirements for the medium being conveyed. Shut off and depressurize the system fully before removing or installing any threaded pipe fitting. Apply an appropriate thread sealant or PTFE tape to the male threads before assembly, and tighten to a snug fit using a pipe wrench — avoid over-torquing, which can crack fittings or damage threads. Verify that the fitting material and pressure rating are compatible with the specific fluid or gas in the system before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Pipe Size\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1-21\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: MNPT (threaded both ends, close pattern)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule\u003c\/strong\u003e: 40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Operating Pressure\u003c\/strong\u003e: 150 psi at 150 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel, Grade B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: Welded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Galvanized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Air, gases, non-potable water, oils\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NIPPLES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 331028209\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NIPPLES","offers":[{"title":"Default Title","offer_id":51149910442290,"sku":"0331028209","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/305986475.jpg?v=1778602351","url":"https:\/\/voomisupply.com\/products\/nipples-331028209-galvanized-steel-pipe-nipple-1-1-4-in","provider":"Voomi Supply","version":"1.0","type":"link"}