{"product_id":"national-marker-n265355-continuous-hinge-1-1-16-x-12-in","title":"National Marker N265355 Continuous Hinge 1-1\/16 X 12 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe NATIONAL MARKER N265355 is a bright brass-finish continuous hinge built for light-duty cabinetry and storage applications. Part of the V570 series, it measures 1-1\/16 inches wide by 12 inches long and is constructed from steel at a .042 gauge thickness. The electrofilm-coated pin measures .090 inches in diameter and is engineered to resist rust while remaining captive in the barrel — it will not fall out when the hinge is cut to length. Screw holes are spaced 2 inches apart, and the hinge ships with Phillips flat No. 4 x 1\/2-inch screws included. A licensed contractor or experienced tradesperson handles installation in typical commercial or residential cabinetry contexts.\u003c\/p\u003e\u003cp\u003eThis continuous hinge is suited for use on tool chests, storage cabinets, folding tables, and hobby project enclosures. Its full-length piano-style design distributes load evenly across the hinge line, making it a practical choice wherever a standard butt hinge would leave the door or panel unsupported along part of its span. The hinge can be cut to any desired length using a hacksaw or metal snips without compromising pin retention.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eV570 series continuous hinge with bright brass finish\u003c\/li\u003e\n\u003cli\u003eCuttable to any length — captive pin will not fall out after cutting\u003c\/li\u003e\n\u003cli\u003eElectrofilm-coated .090-inch diameter pin for rust resistance\u003c\/li\u003e\n\u003cli\u003eScrew holes spaced 2 inches apart for consistent fastener layout\u003c\/li\u003e\n\u003cli\u003eIncludes Phillips flat No. 4 x 1\/2-inch screws\u003c\/li\u003e\n\u003cli\u003eSteel construction at .042 gauge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit continuous hinge for tool chests, cabinets, folding tables, and hobby project enclosures requiring a full-length hinge solution.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003ePower down or secure any cabinet or enclosure before hinge replacement to prevent uncontrolled movement of doors or panels. Cut to length using a hacksaw or aviation snips; deburr cut ends before installation to avoid injury and ensure flush seating. Fasten with the included No. 4 Phillips flat-head screws, ensuring screws seat fully without stripping the substrate. Follow applicable local building or cabinetry standards for load-bearing installations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: V570\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: .042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter\u003c\/strong\u003e: .090 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Coating\u003c\/strong\u003e: Electrofilm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Hole Spacing\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware\u003c\/strong\u003e: Phillips Flat No. 4 x 1\/2-inch screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.203 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NATIONAL MARKER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: N265355\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NATIONAL MARKER","offers":[{"title":"Default Title","offer_id":51347276464434,"sku":"N265355","price":16.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310550627.jpg?v=1782100995","url":"https:\/\/voomisupply.com\/products\/national-marker-n265355-continuous-hinge-1-1-16-x-12-in","provider":"Voomi Supply","version":"1.0","type":"link"}