{"product_id":"napco-isec-kit2-wireless-security-kit-hub-touchscreen","title":"Napco isec-kit2 Wireless Security Kit Hub Touchscreen","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe NAPCO isec-kit2 is a complete wireless intrusion detection kit built around the iSecure hub, a self-contained control unit with a built-in StarLink LTE communicator and an 85 dB siren. The hub supports up to 80 wireless zones for intrusion and fire detection, up to 2 areas, and up to 90 user codes. Over-the-air (OTA) firmware updates are supported. The kit ships ready to deploy and is intended for installation by licensed alarm technicians or security integrators working on residential or light commercial projects.\u003c\/p\u003e\n\u003cp\u003eThis kit is suited for residential and small commercial applications where a fully wireless, cellular-communicating security system is needed without hardwired infrastructure. The hub can be placed anywhere safe on-site, either standing on a surface or wall-mounted. It ships with a plug-in AC power cord and has a provision for a standard 4 Ah, 12-volt backup battery. The included 4.3-inch wireless color touchscreen keypad is transformer-powered and connects wirelessly to the hub, keeping installation clean and flexible. Two wireless window and door transmitters and one wireless PIR motion sensor with a 50-foot by 50-foot detection range round out the kit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eiSecure hub with built-in StarLink LTE communicator for cellular reporting without a separate module\u003c\/li\u003e\n  \u003cli\u003eSupports up to 80 wireless zones for intrusion and fire sensors\u003c\/li\u003e\n  \u003cli\u003eIntegrated 85 dB siren built into the hub\u003c\/li\u003e\n  \u003cli\u003eIncludes ISEC-WL-TOUCH 4.3-inch wireless color touchscreen keypad with plug-in transformer\u003c\/li\u003e\n  \u003cli\u003eIncludes 2 ISEC-WL-XMITTER low-profile crystal-controlled wireless door and window transmitters\u003c\/li\u003e\n  \u003cli\u003eIncludes ISEC-MOTION crystal-controlled wireless PIR motion sensor with 50-foot by 50-foot detection range\u003c\/li\u003e\n  \u003cli\u003eOTA update support and provision for standard 4 Ah, 12-volt backup battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with iSecure-platform wireless sensors and transmitters. Component part numbers included in this kit are ISEC-WL-TOUCH, ISEC-WL-XMITTER, and ISEC-MOTION.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed alarm or low-voltage contractor in accordance with local codes and the National Electrical Code (NEC). Power down the hub before making any wiring connections to the transformer or battery backup. Verify LTE signal strength at the planned hub location before final mounting. Do not install the hub in locations subject to extreme temperatures, direct moisture exposure, or radio frequency interference that could degrade wireless sensor communication.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWireless Zones\u003c\/strong\u003e: Up to 80\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAreas Supported\u003c\/strong\u003e: Up to 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUser Codes\u003c\/strong\u003e: Up to 90\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in Siren\u003c\/strong\u003e: 85 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e: Built-in StarLink LTE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTouchscreen Size\u003c\/strong\u003e: 4.3 inches, wireless color display\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotion Sensor Range\u003c\/strong\u003e: 50 feet by 50 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTransformer Voltage\u003c\/strong\u003e: 16.5 volts, 20 VA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBackup Battery Provision\u003c\/strong\u003e: Standard 4 Ah, 12-volt (not included)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHub Power\u003c\/strong\u003e: Plug-in AC power cord included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFirmware Updates\u003c\/strong\u003e: OTA supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NAPCO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: isec-kit2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NAPCO","offers":[{"title":"Default Title","offer_id":51525359239474,"sku":"ISEC-KIT2","price":302.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/632ae40d2fa0453b2abd0780389a7c6b.jpg?v=1785471597","url":"https:\/\/voomisupply.com\/products\/napco-isec-kit2-wireless-security-kit-hub-touchscreen","provider":"Voomi Supply","version":"1.0","type":"link"}