{"product_id":"napco-g104-pvc-sdr-35-sewer-tee-fitting-4x4x4-in","title":"Napco g104 Pvc Sdr 35 Sewer Tee Fitting 4x4x4 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe NAPCO g104 is a gasketed SDR 35 PVC tee fitting engineered for non-pressure sewer and surface water drainage systems. Molded from PVC and rated to SDR 35 standards, this tee provides a three-way, 4-inch connection for mainline and branch sewer runs. The fitting features a double-seal locked-in rubber gasket that creates a leak-proof joint without solvent cement, making field installation faster and more reliable. Reinforced branches and intersections are built into the design to maintain structural integrity under soil load and typical buried-service conditions. Licensed plumbers and sewer contractors are the primary installers.\u003c\/p\u003e\u003cp\u003eThe g104 is used in residential and light commercial gravity-flow sewer installations where SDR 35 gasketed pipe and fittings are specified. It connects to 4-inch SDR 35 sewer mains and branch lines, handling both sanitary sewer and surface water drainage applications. The gasketed joint system is well suited for direct-bury installations where ground movement or thermal cycling may stress rigid cemented joints.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSDR 35 schedule rating for standard gravity sewer service\u003c\/li\u003e\n\u003cli\u003eLocked-in double-seal rubber gasket for leak-proof, cement-free joints\u003c\/li\u003e\n\u003cli\u003eReinforced branch and intersection geometry for enhanced structural integrity\u003c\/li\u003e\n\u003cli\u003eMolded PVC construction resists corrosion and chemical attack in sewer environments\u003c\/li\u003e\n\u003cli\u003eAll three ports sized at 4 inches for mainline and branch compatibility\u003c\/li\u003e\n\u003cli\u003eRated at 22 psi working pressure and 50 psi surge allowance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and new-installation fitting for 4-inch SDR 35 gasketed PVC sewer pipe systems in non-pressure gravity drainage applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with the International Plumbing Code and applicable local codes for buried sewer systems. Shut off flow and isolate the line segment before cutting in the fitting. Ensure the gasket is properly seated and lubricated per manufacturer guidance before pushing pipe home. Do not use solvent cement on gasketed joints, and verify trench bedding meets code requirements for SDR 35 pipe support.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: G Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 1\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 2\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size 3\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule Rating\u003c\/strong\u003e: SDR 35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 22 psi working \/ 50 psi surge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Molded PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 7.33 inches L x 9.47 inches H\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: NAPCO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: g104\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NAPCO","offers":[{"title":"Default Title","offer_id":51468603752754,"sku":"G104","price":45.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313948346.jpg?v=1783918712","url":"https:\/\/voomisupply.com\/products\/napco-g104-pvc-sdr-35-sewer-tee-fitting-4x4x4-in","provider":"Voomi Supply","version":"1.0","type":"link"}